CCS C Software and Maintenance Offers
FAQFAQ   FAQForum Help   FAQOfficial CCS Support   SearchSearch  RegisterRegister 

ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

CCS does not monitor this forum on a regular basis.

Please do not post bug reports on this forum. Send them to support@ccsinfo.com
Can't Debug Through ICD-U64

 
Post new topic   Reply to topic    CCS Forum Index -> General CCS C Discussion
View previous topic :: View next topic  
Author Message
mobrien99



Joined: 15 Apr 2013
Posts: 3
Location: Penn Yan, NY

View user's profile Send private message

Can't Debug Through ICD-U64
PostPosted: Wed May 28, 2014 8:31 am     Reply with quote
I have been running the ICD-U64 for about 2 years with the same 2 programs and all has been well. I usually just take out the ICD=TRUE define when I don't want to use it. All of a sudden today, without ANY code changes, I can load the code but can no longer start the processor and get the Could Not Start Target. The Target was not halted ... message. I have seen this problem in this forum but no answers that will help me.
I use V4.138 and don't want to change for fear of side effect problems.

I tried all the usual hardware things like different ICD-U64 unit, cables, different target hardware. Nothing works.
Display posts from previous:   
Post new topic   Reply to topic    CCS Forum Index -> General CCS C Discussion All times are GMT - 6 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


Powered by phpBB © 2001, 2005 phpBB Group