 |
 |
| View previous topic :: View next topic |
| Author |
Message |
meysam.za
Joined: 16 Mar 2013
Posts: 7
|
| NOKIA .C |
 Posted: Sat Mar 16, 2013 1:28 pm |
 |
|
i did search very much in web to find nokia 6100 color lcd lib for ccs ...... but  in finally i just find some example about S1D15G10 ... 
is any code to drive PCF-8833 with pic 18f452 or else .
thanks alot 
Last edited by meysam.za on Thu Mar 21, 2013 4:30 pm; edited 1 time in total |
|
 |
necati
Joined: 12 Sep 2003
Posts: 37
Location: istanbul
|
| pcf8833 |
| Posted: Sat Mar 16, 2013 2:21 pm |
|
|
| Code: |
//pcf8833.c
////////////////////////////////////////////////////////////////////////////////
//// GFX driver for Nokia 6100 color LCD screen ////
//// Graphic Controler = Philips PCF8833 ////
//// Res : 132 x 132 x 65K colors (real is 4k colors) ////
/// In this driver i use only 256 couleur , it's alot faster ////
////////////////////////////////////////////////////////////////////////////////
////////////////////////////////////////////////////////////////////////////////
//// Enter here the Pin's you want use for control the screen ////
////////////////////////////////////////////////////////////////////////////////
#define glcd_res PIN_C0
#define glcd_sdata PIN_C1
#define glcd_sclk PIN_C2
#define glcd_cs PIN_C3
////////////////////////////////////////////////////////////////////////////////
//// Enter here the delay for init ,write_data and write command ////
//// att1 : Delay in µSec for the Init routine ////
//// att2 : Delay in nanoseconde / 100 for the glcd_write_command, ////
//// glcd_write_data et glcd_write_dorc routines ////
//// At 40Mhz att2 = 10 represent 1µSec ////
////////////////////////////////////////////////////////////////////////////////
#define att1 1
#define att2 8
////////////////////////////////////////////////////////////////////////////////
#define SCREEN_COLOR BLACK
#define USE_GRFCN
////////////////////////////////////////////////////////////////////////////////
//// Screen limit ////
////////////////////////////////////////////////////////////////////////////////
#define GCLCDX 131
#define GCLCDY 131
#define X_START 0
#define Y_START 0
#define X_END GCLCDX
#define Y_END GCLCDY
////////////////////////////////////////////////////////////////////////////////
//// The PCF8833 Commands ////
////////////////////////////////////////////////////////////////////////////////
#define LCD_NOP 0x00
#define SOFT_RESET 0x01
#define COLOR_8_BIT 0x02
#define COLOR_16_BIT 0x05
#define BOOSTER_ON 0x03
#define BOOSTER_OFF 0x02
#define SLEEP_OUT 0x11
#define SLEEP_IN 0x10
#define DISPLAY_ON 0x29
#define DISPLAY_OFF 0x28
#define PIXELS_OFF 0x22
#define MEM_CONTROL 0x36
#define COLMOD 0x3A
#define SETCON 0x25
#define ADDRX 0x2A
#define ADDRY 0x2B
#define MEMWRITE 0x2C
#define RGBSET 0x2D
#define NORMAL 0x20
#define INVERT 0x21
#define MEM_RGB 0x08 // 00001000 "0": is RGB, "1": is for BGR
#define MEM_LAO 0x10 // 00010000 "0":up to down, "1":down to up
#define MEM_VW 0x20 // 00100000 "0":write in X direction
// "1":write in Y direction
#define MEM_MX 0x40 // 01000000 "0":normal, "1":miroir in X
#define MEM_MY 0x80 // 10000000 "0":normal, "1":miroir in Y
// Valeur utilisé ici = 0b11000000
// for RGB ----0---
// up to down ---0----
// X direction --0-----
// Mirror X -1------
// Mirror Y 1-------
#ifndef ON
#define ON 1
#endif
#ifndef OFF
#define OFF 0
#endif
#ifndef YES
#define YES 1
#endif
#ifndef NO
#define NO 0
#endif
#define RGB(r,g,b) ((r & 0xE0) | ((g & 0xE0) >> 3) | (b >> 6))
#define NONE RGB(0x00, 0x20, 0x00) // == transparent, one green less
#define BLUE 0x03
#define YELLOW 0xFC
#define RED 0XE0
#define GREEN 0X1C
#define BLACK 0X00
#define WHITE 0XFF
#define BRIGHTGREEN 0X3D
#define DARKGREEN 0X14
#define DARKRED 0XA0
#define DARKBLUE 0X02
#define BRIGHTBLUE 0X1F
#define ORANGE 0XF8
#byte SSPCON1 = 0xFC6
#bit SSPEN = SSPCON1.5
////////////////////////////////////////////////////////////////////////////////
//// ////
//// The Functions ////
//// ////
////////////////////////////////////////////////////////////////////////////////
void glcd_init(char contrast);
void glcd_off(void);
void glcd_write_command(char byteforglcd_command);
void glcd_write_data(char byteforglcd_data);
void glcd_write_dorc(char byteforglcd);
void glcd_cls(char color);
void glcd_setarea(char startx, char endx, char starty, char endy);
void glcd_contrast(char contrast);
void glcd_img(char x, char y);
void glcd_anim(char x, char y, int8 frame, int16 wait);
void glcd_font(void);
//int glcd_putc(int16 c);
void glcd_newline(void);
void glcd_gotoxy(char x, char y);
void glcd_fillscreen(char x1, char y1, char x2, char y2,char color);
void glcd_pixel(char x, char y, char color);
void glcd_line(char x1, char y1, char x2, char y2, char couleur);
void glcd_bar(char x1, char y1, char x2, char y2, char width, char color);
void glcd_rect(char x1, char y1, char x2, char y2, char width, int1 fill, char color);
void glcd_circle(char x, char y, char radius, int1 fill, char color);
void glcd_text57(char x, char y, char* textptr, char size, char color, char bkcolor);
void glcd_text812(char x, char y, char* textptr, char color, char bkcolor);
void glcd_color(char newColor);
////////////////////////////////////////////////////////////////////////////////
//// ////
//// Fonts and Images Library ////
//// ////
////////////////////////////////////////////////////////////////////////////////
#include <FONT57.c>
#include <FONT812.c>
#include <image.c>
////////////////////////////////////////////////////////////////////////////////
// //
// Init the screen //
// //
// Param : contraste //
// Modifier ici le set_tris_xxx du port a utiliser //
////////////////////////////////////////////////////////////////////////////////
unsigned int32 i;
char color;
void glcd_init(char contrast)
{
set_tris_c(0x00);
output_c(0x00);
delay_ms(65);
output_bit(glcd_cs,TRUE); // Controler not selected (CE = "1")
delay_us(att1);
output_bit(glcd_res,TRUE); // and no reset (RST = "1")
delay_ms(500); // 0.5 second Delay
output_bit(glcd_res,FALSE);// Controler Reset (RST = "0")
delay_ms(500); // 0.5 second Delay
output_bit(glcd_res,TRUE); // Reset Stop (RST = "1")
delay_us(att1);
output_bit(glcd_cs,FALSE);// Sélect the controler (CE = "0")
delay_us(att1);
glcd_write_command(SOFT_RESET); // Software Reset
delay_us(att1);
glcd_write_command(SLEEP_OUT); // Sleep Out
delay_us(att1);
glcd_write_command(BOOSTER_ON); // Booster ON
delay_ms(10);
glcd_write_command(DISPLAY_ON); // Display ON
delay_us(att1);
glcd_write_command(NORMAL); // NORMAL Mode
delay_us(att1);
glcd_write_command(COLMOD); // Color Mode Command
delay_us(att1);
glcd_write_data(COLOR_8_BIT); // 256 coulors mode
delay_us(att1);
glcd_write_command(RGBSET); // Color palette definition command
// de couleurs
delay_us(att1);
// Send the datas for the 256 colors palette
// RED
glcd_write_data(0);
delay_us(att1);
glcd_write_data(2);
delay_us(att1);
glcd_write_data(4);
delay_us(att1);
glcd_write_data(6);
delay_us(att1);
glcd_write_data(8);
delay_us(att1);
glcd_write_data(10);
delay_us(att1);
glcd_write_data(12);
delay_us(att1);
glcd_write_data(15);
delay_us(att1);
// GREEN
glcd_write_data(0);
delay_us(att1);
glcd_write_data(2);
delay_us(att1);
glcd_write_data(4);
delay_us(att1);
glcd_write_data(6);
delay_us(att1);
glcd_write_data(8);
delay_us(att1);
glcd_write_data(10);
delay_us(att1);
glcd_write_data(12);
delay_us(att1);
glcd_write_data(15);
delay_us(att1);
// BLUE
glcd_write_data(0);
delay_us(att1);
glcd_write_data(4);
delay_us(att1);
glcd_write_data(9);
delay_us(att1);
glcd_write_data(15);
delay_us(att1);
glcd_write_command(LCD_NOP);
delay_us(att1);
glcd_write_command(MEM_CONTROL);
delay_us(att1);
glcd_write_data(0b11000000);
delay_us(att1);
glcd_contrast(contrast); // Ajdust the contrast ( 65 is a good value )
delay_us(att1);
glcd_cls(WHITE); // erase screen
delay_us(att1);
}
////////////////////////////////////////////////////////////////////////////////
// //
// shut down the screen //
// //
////////////////////////////////////////////////////////////////////////////////
void glcd_off(void)
{
glcd_write_command(PIXELS_OFF); // All pixels Off
glcd_write_command(DISPLAY_OFF); // Display Off
glcd_write_command(BOOSTER_OFF); // Booster Off
glcd_write_command(SLEEP_IN); // Sleep In
}
////////////////////////////////////////////////////////////////////////////////
// //
// Send a command //
// //
// Param : Command //
// //
////////////////////////////////////////////////////////////////////////////////
void glcd_write_command(char byteforglcd_command)
{
output_bit(glcd_sclk,FALSE);
delay_cycles(att2);
output_bit(glcd_cs,FALSE);
delay_cycles(att2);
output_bit(glcd_sdata,FALSE);
delay_cycles(att2);
output_bit(glcd_sclk,TRUE);
delay_cycles(att2);
glcd_write_dorc(byteforglcd_command);
output_bit(glcd_sclk,FALSE);
delay_cycles(att2);
output_bit(glcd_cs,TRUE);
delay_cycles(att2);
}
////////////////////////////////////////////////////////////////////////////////
// //
// Send Data //
// //
// Param : 8 bits data //
// //
////////////////////////////////////////////////////////////////////////////////
void glcd_write_data(char byteforglcd_data)
{
output_bit(glcd_sclk,FALSE);
delay_cycles(att2);
output_bit(glcd_cs,FALSE);
delay_cycles(att2);
output_bit(glcd_sdata,TRUE);
delay_cycles(att2);
output_bit(glcd_sclk,TRUE);
delay_cycles(att2);
glcd_write_dorc(byteforglcd_data);
output_bit(glcd_sclk,FALSE);
delay_cycles(att2);
output_bit(glcd_cs,TRUE);
delay_cycles(att2);
}
////////////////////////////////////////////////////////////////////////////////
// //
// Send one byte in serial mode //
// //
// Param : byte (char) //
// //
////////////////////////////////////////////////////////////////////////////////
void glcd_write_dorc(char byteforglcd)
{
output_low(glcd_sclk);
delay_cycles(att2);
output_bit(glcd_sdata,byteforglcd&0x80);
delay_cycles(att2);
output_high(glcd_sclk);
delay_cycles(att2);
output_low(glcd_sclk);
delay_cycles(att2);
output_bit(glcd_sdata,byteforglcd&0x40);
delay_cycles(att2);
output_high(glcd_sclk);
delay_cycles(att2);
output_low(glcd_sclk);
delay_cycles(att2);
output_bit(glcd_sdata,byteforglcd&0x20);
delay_cycles(att2);
output_high(glcd_sclk);
delay_cycles(att2);
output_low(glcd_sclk);
delay_cycles(att2);
output_bit(glcd_sdata,byteforglcd&0x10);
delay_cycles(att2);
output_high(glcd_sclk);
delay_cycles(att2);
output_low(glcd_sclk);
delay_cycles(att2);
output_bit(glcd_sdata,byteforglcd&0x08);
delay_cycles(att2);
output_high(glcd_sclk);
delay_cycles(att2);
output_low(glcd_sclk);
delay_cycles(att2);
output_bit(glcd_sdata,byteforglcd&0x04);
delay_cycles(att2);
output_high(glcd_sclk);
delay_cycles(att2);
output_low(glcd_sclk);
delay_cycles(att2);
output_bit(glcd_sdata,byteforglcd&0x02);
delay_cycles(att2);
output_high(glcd_sclk);
delay_cycles(att2);
output_low(glcd_sclk);
delay_cycles(att2);
output_bit(glcd_sdata,byteforglcd&0x01);
delay_cycles(att2);
output_high(glcd_sclk);
delay_cycles(att2);
}
////////////////////////////////////////////////////////////////////////////////
// //
// Erase screen //
// //
// Param : coulor 00 - FF //
// //
////////////////////////////////////////////////////////////////////////////////
void glcd_cls(char color)
{
unsigned int16 i,n;
//glcd_write_command(DISPLAY_OFF);
n = X_END*Y_END;
glcd_setarea(X_START, X_END, Y_START, Y_END);
glcd_write_command(MEMWRITE);
for(i=n; i>0; i--)
{
glcd_write_data(color);
}
//glcd_write_command(DISPLAY_ON);
}
////////////////////////////////////////////////////////////////////////////////
// //
// Set the write limit for the screen //
// //
// Param : startx, endx, starty, endy //
// //
////////////////////////////////////////////////////////////////////////////////
void glcd_setarea(char startx, char endx, char starty, char endy)
{
glcd_write_command(ADDRX);
glcd_write_data(startx);
glcd_write_data(endx);
glcd_write_command(ADDRY);
glcd_write_data(starty);
glcd_write_data(endy);
}
////////////////////////////////////////////////////////////////////////////////
// //
// Défine the screen contrast //
// //
// Param : contrast (65 = standard level) //
// //
////////////////////////////////////////////////////////////////////////////////
void glcd_contrast(char contrast)
{
output_bit(glcd_cs,FALSE);
delay_cycles(att2);
glcd_write_command(SETCON);
glcd_write_data(contrast);
output_bit(glcd_cs,TRUE);
delay_cycles(att2);
}
////////////////////////////////////////////////////////////////////////////////
// //
// show one pixel //
// //
// Param : x //
// y //
// color - 00 - FF //
// //
////////////////////////////////////////////////////////////////////////////////
void glcd_pixel(char x, char y, char color)
{
glcd_setarea(x, x, y, y);
glcd_write_command(MEMWRITE);
glcd_write_data(color);
}
////////////////////////////////////////////////////////////////////////////////
// //
// Send a Picture to the screen //
// //
// Param : x //
// y //
// //
////////////////////////////////////////////////////////////////////////////////
void glcd_img(char x, char y)
{
unsigned int16 i,n;
char IMGENDX, IMGENDY;
IMGENDX = img[0];
IMGENDY = img[1];
glcd_setarea(x,IMGENDX-1+x,y,IMGENDY-1+y);
n = (IMGENDX*IMGENDY)+2;
glcd_write_command(MEMWRITE);
for(i=2; i<n; i++)
{
glcd_write_data(img[i]);
}
}
////////////////////////////////////////////////////////////////////////////////
// //
// Send a Picture sequence to the screen //
// //
// Param : x //
// y //
// frame - number of images to send //
// wait - time betwen the images in ms //
// //
////////////////////////////////////////////////////////////////////////////////
void glcd_anim(char x, char y, int8 frame, int16 wait)
{
unsigned int16 i,j,n;
char IMGENDX, IMGENDY;
IMGENDX = img_a[0];
IMGENDY = img_a[1];
glcd_setarea(x,IMGENDX-1+x,y,IMGENDY-1+y);
n = IMGENDX*IMGENDY;
glcd_write_command(MEMWRITE);
for (j=0;j<frame;j++)
{
for(i=2; i<n+2; i++)
{
glcd_write_data(img_a[(j*n)+i]);
}
delay_ms(wait);
}
}
////////////////////////////////////////////////////////////////////////////////
// //
// Set the cursor position //
// //
// Param : x //
// y //
// //
////////////////////////////////////////////////////////////////////////////////
void glcd_gotoxy(char x, char y)
{
glcd_setarea(x, x, y, y);
}
////////////////////////////////////////////////////////////////////////////////
// //
// Set a new current color //
// //
// Param : newColor 00 - FF //
// //
////////////////////////////////////////////////////////////////////////////////
void glcd_color(char newColor)
{
color = newColor;
}
////////////////////////////////////////////////////////////////////////////////
// //
// Fill a part of the screen with a color //
// //
// Param : startx, endx, starty, endy //
// Pixel color : 00 - FF //
// //
////////////////////////////////////////////////////////////////////////////////
void glcd_fillscreen(char x1, char y1, char x2, char y2,char color)
{
int16 dx,dy;
int16 i,n;
glcd_setarea(x1,x2,y1,y2);
dx = (int16)abs((signed int16)(x2 - x1))+1;
dy = (int16)abs((signed int16)(y2 - y1))+1;
n = dx*dy;
glcd_write_command(MEMWRITE);
for(i=n; i>0; i--)
{
glcd_write_data(color);
}
}
////////////////////////////////////////////////////////////////////////////////
// //
// draw a line //
// //
// Param : x1,y1 - start coord //
// x2,y2 - end coord //
// color - 00 - FF //
// //
////////////////////////////////////////////////////////////////////////////////
void glcd_line(char x1, char y1, char x2, char y2, char couleur)
{
int16 dy, dx;
signed int8 addx=1, addy=1;
signed int16 P, diff;
int8 i=0;
dx = abs((signed int8)(x2 - x1));
dy = abs((signed int8)(y2 - y1));
if(x1 > x2)
addx = -1;
if(y1 > y2)
addy = -1;
if(dx >= dy)
{
dy *= 2;
P = dy - dx;
diff = P - dx;
for(; i<=dx; ++i)
{
glcd_pixel(x1, y1, couleur);
if(P < 0)
{
P += dy;
x1 += addx;
}
else
{
P += diff;
x1 += addx;
y1 += addy;
}
}
}
else
{
dx *= 2;
P = dx - dy;
diff = P - dy;
for(; i<=dy; ++i)
{
glcd_pixel(x1, y1, couleur);
if(P < 0)
{
P += dx;
y1 += addy;
}
else
{
P += diff;
x1 += addx;
y1 += addy;
}
}
}
}
////////////////////////////////////////////////////////////////////////////////
// //
// draw a bar //
// //
// Param : x1,y1 - start //
// x2,y2 - end //
// width - width of the bar //
// color - 00 - FF //
// //
////////////////////////////////////////////////////////////////////////////////
void glcd_bar(char x1, char y1, char x2, char y2, char width, char color)
{
signed int x, y, addx, addy, j;
signed long P, dx, dy, c1, c2;
int i;
dx = abs((signed int)(x2 - x1));
dy = abs((signed int)(y2 - y1));
x = x1;
y = y1;
c1 = -dx*x1 - dy*y1;
c2 = -dx*x2 - dy*y2;
if(x1 > x2)
{
addx = -1;
c1 = -dx*x2 - dy*y2;
c2 = -dx*x1 - dy*y1;
}
else
addx = 1;
if(y1 > y2)
{
addy = -1;
c1 = -dx*x2 - dy*y2;
c2 = -dx*x1 - dy*y1;
}
else
addy = 1;
if(dx >= dy)
{
P = 2*dy - dx;
for(i=0; i<=dx; ++i)
{
for(j=-(width/2); j<width/2+width%2; ++j)
{
if(dx*x+dy*(y+j)+c1 >= 0 && dx*x+dy*(y+j)+c2 <=0)
glcd_pixel((char)x, (char)(y+j), color);
}
if(P < 0)
{
P += 2*dy;
x += addx;
}
else
{
P += 2*dy - 2*dx;
x += addx;
y += addy;
}
}
}
else
{
P = 2*dx - dy;
for(i=0; i<=dy; ++i)
{
if(P < 0)
{
P += 2*dx;
y += addy;
}
else
{
P += 2*dx - 2*dy;
x += addx;
y += addy;
}
for(j=-(width/2); j<width/2+width%2; ++j)
{
if(dx*x+dy*(y+j)+c1 >= 0 && dx*x+dy*(y+j)+c2 <=0)
glcd_pixel((char)(x+j), (char)y, color);
}
}
}
}
////////////////////////////////////////////////////////////////////////////////
// //
// draw a rectangle //
// //
// Param : x1,y1 - start //
// x2,y2 - end //
// width - width of the drawing //
// fill - Full YES or NO (fill or not the rectangle) //
// color - 00 - FF //
// //
////////////////////////////////////////////////////////////////////////////////
void glcd_rect(char x1, char y1, char x2, char y2, char width, int1 fill, char color)
{
if(fill)
{
int y, ymax; // Find the y min and max
if(y1 < y2)
{
y = y1;
ymax = y2;
}
else
{
y = y2;
ymax = y1;
}
glcd_fillscreen(x1,y,x2,ymax,color); // Draw box to fill the rectangle
}
else
{
if(width)
{
glcd_bar(x1, y1, x2, y1, width, color); // Draw the 4 sides
glcd_bar(x1, y2, x2, y2, width, color);
glcd_bar(x1, y1, x1, y2, width, color);
glcd_bar(x2, y1, x2, y2, width, color);
}
else
{
glcd_line(x1, y1, x2, y1, color);
glcd_line(x1, y2, x2, y2, color);
glcd_line(x1, y1, x1, y2, color);
glcd_line(x2, y1, x2, y2, color);
}
}
}
////////////////////////////////////////////////////////////////////////////////
// //
// draw a circle //
// //
// Param : x,y - center from circle //
// radius - radius from the circle //
// fill - Full YES or NO (fill or not the circle) //
// color - 00 - FF //
// //
////////////////////////////////////////////////////////////////////////////////
void glcd_circle(char x, char y, char radius, int1 fill, char color)
{
signed int a, b, P;
a = 0;
b = radius;
P = 1 - radius;
do
{
if(fill)
{
glcd_line(x-a, y+b, x+a, y+b, color);
glcd_line(x-a, y-b, x+a, y-b, color);
glcd_line(x-b, y+a, x+b, y+a, color);
glcd_line(x-b, y-a, x+b, y-a, color);
}
else
{
glcd_pixel(a+x, b+y, color);
glcd_pixel(b+x, a+y, color);
glcd_pixel(x-a, b+y, color);
glcd_pixel(x-b, a+y, color);
glcd_pixel(b+x, y-a, color);
glcd_pixel(a+x, y-b, color);
glcd_pixel(x-a, y-b, color);
glcd_pixel(x-b, y-a, color);
}
if(P < 0)
P+= 3 + 2*a++;
else
P+= 5 + 2*(a++ - b--);
} while(a <= b);
}
////////////////////////////////////////////////////////////////////////////////
// //
// Write a text with the 5 x 7 pixels font //
// //
// Param : x,y - coord from the 1st char //
// textptr _ pointer to a char array //
// size - text size : 1 = 5x7, 2 = 10x14 //
// color - 00 - FF //
// //
////////////////////////////////////////////////////////////////////////////////
void glcd_text57(char x, char y, char* textptr, char size, char color, char bkcolor)
{
int8 j, k, l, m; // Loop counters
int8 pixelData[5]; // Stores character data
for(; *textptr != '\0'; ++textptr, ++x)// Loop through the passed string
{
if(*textptr < 'S') // Checks if the letter is in the first font array
memcpy(pixelData, FONT[*textptr - ' '], 5);
else if(*textptr <= '~') // Check if the letter is in the second font array
memcpy(pixelData, FONT2[*textptr - 'S'], 5);
else
memcpy(pixelData, FONT[0], 5); // Default to space
// Handles newline and carriage returns
switch(*textptr)
{
case '\n':
y += 7*size + 1;
continue;
case '\r':
x = 0;
continue;
}
if(x+5*size > X_END) // Performs character wrapping
{
x = 0; // Set x at far left position
y += 7*size + 1; // Set y at next position down
}
for(j=0; j<5; ++j, x+=size) // Loop through character byte data
{
for(k=0; k < 7; ++k) // Loop through the vertical pixels
{
if(bit_test(pixelData[j], k)) // Check if the pixel should be set
{
for(l=0; l < size; ++l) // These two loops change the
{ // character's size
for(m=0; m < size; ++m)
{
glcd_pixel(x+m, y+k*size+l, color); // Draws the pixel
}
}
}
else if (bkcolor != NONE)
{
for(l=0; l < size; ++l) // These two loops change the
{ // character's size
for(m=0; m < size; ++m)
{
glcd_pixel(x+m, y+k*size+l, bkcolor); // Draws the pixel
}
}
}
}
}
}
}
////////////////////////////////////////////////////////////////////////////////
// //
// Write a text with the 8 x 12 pixels font //
// //
// Param : x,y - coord from the 1st char //
// textptr _ pointer to a char array //
// color - 00 - FF - NONE //
// //
////////////////////////////////////////////////////////////////////////////////
void glcd_text812(char x, char y, char* textptr, char color, char bkcolor)
{
int8 j, k; // Loop counters
int8 pixelData[16]; // Stores character data
for(; *textptr != '\0'; ++textptr)// Loop through the passed string
{
if(*textptr <= '~') //
memcpy(pixelData, FONT812[*textptr - ' '], 16);
else
memcpy(pixelData, FONT812[0], 16); // Default to space
// Handles newline and carriage returns
switch(*textptr)
{
case '\n':
y += 12 + 1;
continue;
case '\r':
x = 0;
continue;
}
if(x+8 > X_END) // Performs character wrapping
{
x = 0; // Set x at far left position
y += 12 + 1; // Set y at next position down
}
for(j=0; j<8; j++, ++x) // Loop through character byte data
{
for(k=0; k < 8; ++k) // Loop through the vertical pixels
{
if(bit_test(pixelData[j], k)) // Check if the pixel should be set
{
glcd_pixel(x, y+k, color); // Draws the pixel
}
else if (bkcolor != NONE)
{
glcd_pixel(x, y+k, bkcolor); // Draws the pixel
}
}
for(k=0; k < 4; ++k) // Loop through the vertical pixels
{
if(bit_test(pixelData[j+8], k)) // Check if the pixel should be set
{
glcd_pixel(x, y+(k+8), color); // Draws the pixel
}
else if (bkcolor != NONE)
{
glcd_pixel(x, y+(k+8), bkcolor); // Draws the pixel
}
}
}
++x;
}
} |
|
|
|
meysam.za
Joined: 16 Mar 2013
Posts: 7
|
|
| Posted: Sat Mar 16, 2013 3:13 pm |
|
|
Thanks alot for reply.
I test these code and working nice.
I have one FONT5*7. How can i use these code in CCS ?
This is my code:
| Code: |
const prog_uint8_t Font5x7[] = {
0x00, 0x00, 0x00, 0x00, 0x00,// (space)
0x00, 0x00, 0x5F, 0x00, 0x00,// !
0x00, 0x07, 0x00, 0x07, 0x00,// "
0x14, 0x7F, 0x14, 0x7F, 0x14,// #
0x24, 0x2A, 0x7F, 0x2A, 0x12,// $
0x23, 0x13, 0x08, 0x64, 0x62,// %
0x36, 0x49, 0x55, 0x22, 0x50,// &
0x00, 0x05, 0x03, 0x00, 0x00,// '
0x00, 0x1C, 0x22, 0x41, 0x00,// (
0x00, 0x41, 0x22, 0x1C, 0x00,// )
0x08, 0x2A, 0x1C, 0x2A, 0x08,// *
0x08, 0x08, 0x3E, 0x08, 0x08,// +
0x00, 0x50, 0x30, 0x00, 0x00,// ,
0x08, 0x08, 0x08, 0x08, 0x08,// -
0x00, 0x60, 0x60, 0x00, 0x00,// .
0x20, 0x10, 0x08, 0x04, 0x02,// /
0x3E, 0x51, 0x49, 0x45, 0x3E,// 0
0x00, 0x42, 0x7F, 0x40, 0x00,// 1
0x42, 0x61, 0x51, 0x49, 0x46,// 2
0x21, 0x41, 0x45, 0x4B, 0x31,// 3
0x18, 0x14, 0x12, 0x7F, 0x10,// 4
0x27, 0x45, 0x45, 0x45, 0x39,// 5
0x3C, 0x4A, 0x49, 0x49, 0x30,// 6
0x01, 0x71, 0x09, 0x05, 0x03,// 7
0x36, 0x49, 0x49, 0x49, 0x36,// 8
0x06, 0x49, 0x49, 0x29, 0x1E,// 9
0x00, 0x36, 0x36, 0x00, 0x00,// :
0x00, 0x56, 0x36, 0x00, 0x00,// ;
0x00, 0x08, 0x14, 0x22, 0x41,// <
0x14, 0x14, 0x14, 0x14, 0x14,// =
0x41, 0x22, 0x14, 0x08, 0x00,// >
0x02, 0x01, 0x51, 0x09, 0x06,// ?
0x32, 0x49, 0x79, 0x41, 0x3E,// @
0x7E, 0x11, 0x11, 0x11, 0x7E,// A
0x7F, 0x49, 0x49, 0x49, 0x36,// B
0x3E, 0x41, 0x41, 0x41, 0x22,// C
0x7F, 0x41, 0x41, 0x22, 0x1C,// D
0x7F, 0x49, 0x49, 0x49, 0x41,// E
0x7F, 0x09, 0x09, 0x01, 0x01,// F
0x3E, 0x41, 0x41, 0x51, 0x32,// G
0x7F, 0x08, 0x08, 0x08, 0x7F,// H
0x00, 0x41, 0x7F, 0x41, 0x00,// I
0x20, 0x40, 0x41, 0x3F, 0x01,// J
0x7F, 0x08, 0x14, 0x22, 0x41,// K
0x7F, 0x40, 0x40, 0x40, 0x40,// L
0x7F, 0x02, 0x04, 0x02, 0x7F,// M
0x7F, 0x04, 0x08, 0x10, 0x7F,// N
0x3E, 0x41, 0x41, 0x41, 0x3E,// O
0x7F, 0x09, 0x09, 0x09, 0x06,// P
0x3E, 0x41, 0x51, 0x21, 0x5E,// Q
0x7F, 0x09, 0x19, 0x29, 0x46,// R
0x46, 0x49, 0x49, 0x49, 0x31,// S
0x01, 0x01, 0x7F, 0x01, 0x01,// T
0x3F, 0x40, 0x40, 0x40, 0x3F,// U
0x1F, 0x20, 0x40, 0x20, 0x1F,// V
0x7F, 0x20, 0x18, 0x20, 0x7F,// W
0x63, 0x14, 0x08, 0x14, 0x63,// X
0x03, 0x04, 0x78, 0x04, 0x03,// Y
0x61, 0x51, 0x49, 0x45, 0x43,// Z
0x00, 0x00, 0x7F, 0x41, 0x41,// [
0x02, 0x04, 0x08, 0x10, 0x20,// "\"
0x41, 0x41, 0x7F, 0x00, 0x00,// ]
0x04, 0x02, 0x01, 0x02, 0x04,// ^
0x40, 0x40, 0x40, 0x40, 0x40,// _
0x00, 0x01, 0x02, 0x04, 0x00,// `
0x20, 0x54, 0x54, 0x54, 0x78,// a
0x7F, 0x48, 0x44, 0x44, 0x38,// b
0x38, 0x44, 0x44, 0x44, 0x20,// c
0x38, 0x44, 0x44, 0x48, 0x7F,// d
0x38, 0x54, 0x54, 0x54, 0x18,// e
0x08, 0x7E, 0x09, 0x01, 0x02,// f
0x08, 0x14, 0x54, 0x54, 0x3C,// g
0x7F, 0x08, 0x04, 0x04, 0x78,// h
0x00, 0x44, 0x7D, 0x40, 0x00,// i
0x20, 0x40, 0x44, 0x3D, 0x00,// j
0x00, 0x7F, 0x10, 0x28, 0x44,// k
0x00, 0x41, 0x7F, 0x40, 0x00,// l
0x7C, 0x04, 0x18, 0x04, 0x78,// m
0x7C, 0x08, 0x04, 0x04, 0x78,// n
0x38, 0x44, 0x44, 0x44, 0x38,// o
0x7C, 0x14, 0x14, 0x14, 0x08,// p
0x08, 0x14, 0x14, 0x18, 0x7C,// q
0x7C, 0x08, 0x04, 0x04, 0x08,// r
0x48, 0x54, 0x54, 0x54, 0x20,// s
0x04, 0x3F, 0x44, 0x40, 0x20,// t
0x3C, 0x40, 0x40, 0x20, 0x7C,// u
0x1C, 0x20, 0x40, 0x20, 0x1C,// v
0x3C, 0x40, 0x30, 0x40, 0x3C,// w
0x44, 0x28, 0x10, 0x28, 0x44,// x
0x0C, 0x50, 0x50, 0x50, 0x3C,// y
0x44, 0x64, 0x54, 0x4C, 0x44,// z
0x00, 0x08, 0x36, 0x41, 0x00,// {
0x00, 0x00, 0x7F, 0x00, 0x00,// |
0x00, 0x41, 0x36, 0x08, 0x00,// }
0x08, 0x08, 0x2A, 0x1C, 0x08,// ->
0x08, 0x1C, 0x2A, 0x08, 0x08 // <-
};
|
This is Codevision Avr code. How can I change it to CCS code and save as FONT5X7.C ?
I save it as FONT5X7.C in Wordpad... but compiler does error ...
 |
|
|
Ttelmah
Joined: 11 Mar 2010
Posts: 19504
|
|
| Posted: Sun Mar 17, 2013 4:11 am |
|
|
That is perfectly acceptable CCS code, _except_ there will not be a type called 'prog_uint8_t'.
Multiple choices:
1) Just use 'unsigned int8'.
2) Load 'stdint.h', and use 'uint8_t'.
3) Typedef a new type called 'prog_uint8_t'.
Best Wishes |
|
|
meysam.za
Joined: 16 Mar 2013
Posts: 7
|
|
| Posted: Sun Mar 17, 2013 4:54 am |
|
|
ok ... it's work thanks alot
Last edited by meysam.za on Thu Mar 21, 2013 4:10 pm; edited 2 times in total |
|
|
meysam.za
Joined: 16 Mar 2013
Posts: 7
|
|
| Posted: Mon Mar 18, 2013 4:50 am |
|
|
Last edited by meysam.za on Thu Mar 21, 2013 4:11 pm; edited 1 time in total |
|
|
ALPL
Joined: 29 Mar 2009
Posts: 30
|
|
| Posted: Wed Mar 20, 2013 12:17 am |
|
|
A mistake I see in the code is: escreve="olda";
You cannot treat a string (field) like a variable - you need to use eg strcpy(escreve,"olda") ;
or better initialize like this: char escreve[]="olda"; |
|
|
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
|
Powered by phpBB © 2001, 2005 phpBB Group
|
FAQ 
Search
Register
Profile 
Log in to check your private messages 
Log in
