![](templates/subSilver/images/CCSLogo.jpg) |
![CCS C Software and Maintenance Offers](templates/subSilver/images/forumAd6.jpg) |
View previous topic :: View next topic |
Author |
Message |
chaowan_jun
Joined: 20 Jan 2012 Posts: 2
|
18f86j50 USB problem |
Posted: Fri Jan 20, 2012 1:58 pm |
|
|
it's show "usb not recognize"
HID Mouse --- the cursor must to move in a circle form
This is my code that work on PIC18F4550 But when I change a controller to PIC18F86J50 it doesn't work
my ccs version 4.114
my xtal is 20 MHz
help me plzzz
thank you very much
Code: |
#include <18F86j50.h>
#fuses HSPLL,PLL5,NOWDT,NOPROTECT,NOCPUDIV
#use delay(clock=48000000)
#include <pic18_usb.h>
#include <usb_desc_mouse.h>
#include <USB.c>
#byte OSCTUNE = 0xF9B
#bit PLLEN = OSCTUNE.6
void main(void) {
PLLEN = 1;
delay_ms(10);
#define MOUSE_SEQUENCE_STEPS 16
const char mouse_seq[MOUSE_SEQUENCE_STEPS]=
{0, 1, 3, 4, 4, 4, 3, 1, 0, -1, -3, -4, -4, -4, -3, -1};
int8 out_data[4];
unsigned int8 x_seq=0; unsigned int8 y_seq=MOUSE_SEQUENCE_STEPS/4;
unsigned int8 count=0;
usb_init_cs();
while (TRUE) {
usb_task();
if (usb_enumerated()) {
out_data[0]=0; //button state goes here
out_data[1]=mouse_seq[x_seq];
out_data[2]=mouse_seq[y_seq];
out_data[3]=0; //wheel state goes here
if (usb_put_packet(1,out_data,4,USB_DTS_TOGGLE))
count++;
if (count > 10) {
if (++x_seq>=MOUSE_SEQUENCE_STEPS) {x_seq=0;}
if (++y_seq>=MOUSE_SEQUENCE_STEPS) {y_seq=0;}
count=0;
}
delay_ms(10);
}
}
} |
|
|
![](templates/subSilver/images/spacer.gif) |
chaowan_jun
Joined: 20 Jan 2012 Posts: 2
|
|
Posted: Mon Jan 30, 2012 7:06 am |
|
|
Help me please !!!! |
|
![](templates/subSilver/images/spacer.gif) |
temtronic
Joined: 01 Jul 2010 Posts: 9177 Location: Greensville,Ontario
|
|
Posted: Mon Jan 30, 2012 7:16 am |
|
|
Get both datasheets and compare what is different about the two devices.
Have you got the 'Hello World' and 'blinking LED' programs to run on the 2nd device ?
As for the message, if that's from a PC running Windows, odds are you didn't load whatever driver is necessary for the OS to recognize the 'new' USB device( the PIC). |
|
![](templates/subSilver/images/spacer.gif) |
|
|
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
|
Powered by phpBB © 2001, 2005 phpBB Group
|