View previous topic :: View next topic |
Author |
Message |
joseph20480
Joined: 21 Dec 2011 Posts: 42
|
ex_mmcsd : Init ok with or without card... |
Posted: Thu Dec 22, 2011 3:01 pm |
|
|
Hi !
I try to connect a sdcard/mmc to a pic (pic18f4550 / CCS 4.114). For that I want use the ex.mmcsd... but I have somethings not expected.
When I call the function mmcsd_init(), she return alway ok... with or without memory card.
It's a another of ccs or I have forgotten something ?
Thanks in advance.
joseph |
|
![](templates/subSilver/images/spacer.gif) |
temtronic
Joined: 01 Jul 2010 Posts: 9178 Location: Greensville,Ontario
|
|
Posted: Thu Dec 22, 2011 3:26 pm |
|
|
Please provide us a schematic diagram of your system.
As well as your 'main' program. |
|
![](templates/subSilver/images/spacer.gif) |
asmallri
Joined: 12 Aug 2004 Posts: 1634 Location: Perth, Australia
|
Re: ex_mmcsd : Init ok with or without card... |
Posted: Thu Dec 22, 2011 5:24 pm |
|
|
joseph20480 wrote: | Hi !
I try to connect a sdcard/mmc to a pic (pic18f4550 / CCS 4.114). For that I want use the ex.mmcsd... but I have somethings not expected.
When I call the function mmcsd_init(), she return alway ok... with or without memory card.
It's a another of ccs or I have forgotten something ?
Thanks in advance.
joseph |
I cannot speak specifically to the CCS implementation however it maybe that any response other than 0xff from the card is considered to be successful. If you do not have a pull-up resistor on DO of the SD/MMC card socket then without a card the input to the PIC is floating as a consequence the PIC may, and often will, read a non 0xff value. _________________ Regards, Andrew
http://www.brushelectronics.com/software
Home of Ethernet, SD card and Encrypted Serial Bootloaders for PICs!! |
|
![](templates/subSilver/images/spacer.gif) |
joseph20480
Joined: 21 Dec 2011 Posts: 42
|
|
Posted: Fri Dec 23, 2011 2:38 am |
|
|
Thanks for your reply,
I will seen my schematic and post more informations....
About your reflexion, that is the sd card not responding seem to be Ok....i'm not sure... |
|
![](templates/subSilver/images/spacer.gif) |
|