![](templates/subSilver/images/CCSLogo.jpg) |
![CCS C Software and Maintenance Offers](templates/subSilver/images/forumAd6.jpg) |
View previous topic :: View next topic |
Author |
Message |
assaad
Joined: 09 Dec 2009 Posts: 37
|
18f8722 and T6963c |
Posted: Mon May 24, 2010 11:52 am |
|
|
Hi all,
I am using GLCD 240x 128.
I am using the driver from this thread:
http://www.ccsinfo.com/forum/viewtopic.php?t=31255
When I connect the control signals of the LCD to PortC 4-7, and using the driver without changing it works great.
But in my real hardware I am using PortJ 4-7 for control signals. I modified the driver to PortJ, but still I could not see anything on the LCD.
I have been trying for 2 days. I wish you can help to solve the problem.
Here the source code for test :
Code: |
#include <18F8722.h>
//#device *=16
//#device adc=10
#use delay(clock=4000000)//,RESTART_WDT)
#use rs232(baud=9600, xmit=PIN_A2,rcv=PIN_A3)
#fuses NOWDT,HS, NOPUT, PROTECT, BROWNOUT, NOLVP, NOCPD, NOWRT, NODEBUG,MCU
#include <T6963C2.c>
void main() {
int n;
int8 bt_logo[11] = { //8x11 picture
0b00010000, // XX
0b00011000, // XXXX
0b00010100, // XX XX
0b01010010, // XX XX XX
0b00110100, // XXXX XX
0b00011000, // XXXX
0b00110100, // XXXX XX
0b01010010, // XX XX XX
0b00010100, // XX XX
0b00011000, // XXXX
0b00010000 // XX
};
glcd_init(240,128);
glcd_WriteByte(1, (LCDModeSet|LCDMode_XOR));
glcd_WriteByte(1, (LCDDispMode|LCDDisp_TXT|LCDDisp_GRH));
glcd_gotoxy(3,0,1); // 1 = text area of memory; note that there are only
// 8 rows of text possible
glcd_putc("HELLO ");
glcd_gotoxy(4,1,1); // 1 = text area of memory; note that there are only
// 8 rows of text possible
glcd_putc("WELCOME");
glcd_line(1,100,200,100,1);
glcd_image8(&bt_logo[0],212,40,8,11);
glcd_line(1,50,1,100,1);
glcd_square(2,32,130,113,1);
// glcd_box(25,25,50,40,1);
// glcd_box(60,30,100,60,0);
glcd_line(3,6,20,50,1);
glcd_line(100,40,210,20,1);
glcd_box(14,14,100,60,1);
glcd_box(60,30,100,60,0);
glcd_square(20,12,180,50,1);
glcd_image8(&bt_logo[0],212,40,8,11);
glcd_image8(&bt_logo[0],216,40,8,11);
glcd_line(30,6,200,100,1);
glcd_square(2,32,130,113,1);
glcd_image8(&bt_logo[0],26,110,8,11);
}
|
here is the driver
Code: |
/////////////////////////////////////////////////////////////////////////
//// T6963C2.c - T6963C driver ////
//// Not for comercial Use ////
//// Driver by treitmey Graphic functions and Resolution Select ////
//// by endSly (endsly@gmail.com) ////
//// ////
//// This file contains drivers for using a Tosiba T6963C controller ////
//// in parallel/8080(intel) mode. The T6963C is 240 pixels across ////
//// and 64 pixels down. The driver treats the upper left pixel 0,0 ////
//// ////
//// Connections are as follows: ////
//// /WR - - j4 ////
//// /RD - - j5 ////
//// C//D- - j6 ////
//// /RST- - j7 ////
//// DATA0-7 PORTD0-7 ////
//// LCD's FS is tied low (FS = 0 is 8x8 font) ////
//// ////
/////////////////////////////////////////////////////////////////////////
// 240 x 64 in the 8x8 font mode means that 30 characters across by
// 8 rows of characters may be displayed
#define set_tris_lcd(x) set_tris_d(x)
#define LCDColorBlack 0b1
#define LCDColorWhite 0b0
//TRIS DataBus=x, note:control bus (PORTC) always outputs
unsigned int16 TextHome = 0x0F00;//0x0780;
const int8 TextArea = 0x001E; // how many bytes before a new line
const int16 GraphicsHome = 0x0000;
const int8 GraphicsArea = 0x001E; // how many bytes before a new line
const int8 AutoModeWrite = 0xB0;
const int8 AutoModeRead = 0xB1;
const int8 AutoModeReset = 0xB2;
const int8 LCDModeSet = 0x80; // send this OR'd with the following
const int8 LCDMode_OR = 0b0000;
const int8 LCDMode_XOR = 0b0001;
const int8 LCDMode_AND = 0b0010;
const int8 LCDMode_TA = 0b0100; // TEXT ATTRIBUTE mode.
const int8 LCDMode_RAM = 0b1000; // 1=CG RAM, 0=internal CG ROM
const int8 LCDSetCursorPtr = 0x21; // cursor address
const int8 LCDSetCursorSize = 0xA0; // 1 line cursor
const int8 LCDDispMode = 0x90; // send this OR'd with the following
const int8 LCDDisp_BLK = 0b0001;
const int8 LCDDisp_CUR = 0b0010;
const int8 LCDDisp_TXT = 0b0100;
const int8 LCDDisp_GRH = 0b1000;
const int8 LCDBitSet = 0xF8;
const int8 LCDBitReset = 0xF0;
const int8 LCDBit0 = 0b000;
const int8 LCDBit1 = 0b001;
const int8 LCDBit2 = 0b010;
const int8 LCDBit3 = 0b011;
const int8 LCDBit4 = 0b100;
const int8 LCDBit5 = 0b101;
const int8 LCDBit6 = 0b110;
const int8 LCDBit7 = 0b111;
const int8 LCDSetPtr = 0xE0;
struct lcd_pin_def
{
BOOLEAN unused1; // j0
BOOLEAN unused2; // j1
BOOLEAN unused3; // j2
BOOLEAN unused4; // j3
BOOLEAN w_bar; // j4 Write bar active low
BOOLEAN r_bar; // j5 Read bar active low
BOOLEAN cd; // j6 Command/Data BAR 1=command 0=data
BOOLEAN reset_bar; // j7 Reset active low
int data : 8; // PortD=Data bus
};
struct lcd_pin_def LCD;
#byte LCD = 0xf88 // portj address on 18F8722
int glcd_ReadByte(void);
void glcd_WriteByte(int1 cd, int data);
void glcd_WriteByteAuto(int data);
void glcd_WriteCmd2(int16 data, int cmd);
void glcd_WriteCmd1(int data, int cmd);
void glcd_gotoxy(int x, int y, int1 text);
#inline
void glcd_init(unsigned int16 res_x, unsigned int16 res_y) {
int16 counter;
TextHome = (res_x/8)*res_y; //0x0F00;//0x0780;
set_tris_J(0x00); // graphic lcd control lines all output
set_tris_lcd(0xff); //TRIS DATA bus,note:control bus always outputs
LCD.w_bar = 1; // INITIAL STATES OF CONTROL PINS
LCD.r_bar = 1; //
LCD.cd = 1; // command
LCD.reset_bar = 0; // perform a reset
delay_us(10); // delay for a reset
LCD.reset_bar = 1; // run
// Set up the graphics and text areas
glcd_WriteCmd2(TextHome, 0x40);
glcd_WriteCmd2(TextArea, 0x41);
glcd_WriteCmd2(GraphicsHome, 0x42);
glcd_WriteCmd2(GraphicsArea, 0x43);
// set address to 0
glcd_WriteCmd2(0x0000, 0x24);
glcd_WriteCmd2(0x0000, 0x24);
// Clear all RAM of LCD (8k)
glcd_WriteByte(1, AutoModeWrite);
for (counter = 0; counter < 0x1fff; counter++)
{
glcd_WriteByteAuto(0); // fill everything with zeros
}
glcd_WriteByte(1, AutoModeReset);
}
void glcd_WriteByte(int1 cd, int data)
{
int status = 0, temp = 0;
set_tris_lcd(0xff);
LCD.w_bar = 1;
LCD.r_bar= 1;
LCD.cd = 1;//defaults
while (status != 0x03) { // is LCD busy?
LCD.r_bar= 0;
temp = LCD.data;
LCD.r_bar = 1;
status = temp & 0x03;
}
set_tris_lcd(0x00); // All outputs
LCD.cd = cd; // Command/Data bar
LCD.data = data;
LCD.r_bar = 1; // not read
LCD.w_bar = 0; // write
LCD.w_bar = 1; // release
}
void glcd_WriteByteAuto(int data)
{
int status = 0, temp = 0; // status bits ARE DIFFERENT BITS THAN NORMAL
set_tris_lcd(0xff);
LCD.w_bar = 1;
LCD.r_bar = 1;
LCD.cd = 1; // defaults
while (status != 0x08) { // is LCD busy?
LCD.r_bar = 0;
temp = LCD.data;
LCD.r_bar = 1;
status = temp & 0x08;
}
set_tris_lcd(0x00); // All outputs
LCD.cd = 0; // This is always data, cd=0
LCD.data = data; // Put data on data bus
LCD.w_bar = 0; // write
LCD.w_bar = 1; // release
}
void glcd_WriteCmd1(int data, int cmd)
{
glcd_WriteByte(0, data);
glcd_WriteByte(1, cmd);
}
void glcd_WriteCmd2(int16 data, int cmd)
{
glcd_WriteByte(0, data & 0xff);
glcd_WriteByte(0, data>>8);
glcd_WriteByte(1, cmd);
}
int glcd_ReadByte(void)
{
int data = 0, status = 0, temp = 0;
set_tris_lcd(0xff);
LCD.w_bar = 1;
LCD.r_bar = 1;
LCD.cd = 1; // defaults
#asm nop #endasm
while (status != 0x03) { // is LCD busy?
LCD.r_bar = 0;
temp = LCD.data;
LCD.r_bar = 1;
status = temp & 0x03;
}
LCD.cd = 0; // Command/Data bar
LCD.r_bar = 0; // read
/////////////////////////////////////////////////////////
#asm nop #endasm // THIS PAUSE IS VERY NESSESARY !!!//
/////////////////////////////////////////////////////////
data = LCD.data;
LCD.r_bar = 1;
LCD.cd = 1;
return data; // Return the read data
}
void glcd_putc(char c) {
glcd_WriteCmd1(c - 0x20, 0xc0);
}
void glcd_gotoxy(int x, int y, int1 text) { // sets memory location to screen location x, y
// location 1,1 is upper left corner; text = 1 (text area), text = 0 (graphics area)
int16 location, home;
int line;
if (!text) {
home = GraphicsHome;
line = GraphicsArea;
} else {
home = TextHome;
line = TextArea;
}
location = home + (((int16)y) * line) + x;
glcd_WriteCmd2(location, 0x24);
}
// - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - //
// Purpose: Clears LCD RAM
// - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - //
void glcd_clr(int16 location,int16 size)
{
////fprintf(DEBUG,"loc=%lu size=%lu\n\r",location,size);
// look very simular to the init,... doesn't it. : )
glcd_WriteCmd2(location,LCDSetPtr);
glcd_WriteCmd1(1,AutoModeWrite);
for (;size;size--)
{
glcd_WriteByteAuto(0x00);//clear ram
}
glcd_WriteCmd1(1,AutoModeReset);
}
/////////////////////////////////////////
// Graphics Controller by endSly (c)2007
// endSly@gmail.com
// Not for comercial use
/////////////////////////////////////////
unsigned int8 i; //General Purpouse variable
// glcd_pixel(x,y,c) sets pixel x,y with c color
void glcd_pixel(unsigned int8 x, unsigned int8 y, int1 c){
unsigned int8 x_H;
unsigned int8 x_L=0;
x_H = (x / 8);
x_L = 7 - (x - 8*x_H);
glcd_gotoxy(x_H,y,0); //Bug fixed, thanks to etiedon
if(c){
glcd_WriteCmd1(1,(LCDBitSet|x_L));
} else {
glcd_WriteCmd1(1,(LCDBitReset|x_L));
}
}
// glcd_pixel8(x,y,px8) sets 8 pixels in line.
void glcd_pixel8(unsigned int8 x, unsigned int8 y, int8 pixel8){
unsigned int8 x_H;
x_H = (x / 8);
glcd_gotoxy(x_H+1,y,0);
glcd_WriteCmd1(pixel8,0xc0);
}
// glcd_line(x0,y0, x1,y1, c) puts line from (x0, y0) to (x1, y1) with c color
#separate
void glcd_line(signed int16 x0, signed int16 y0,
signed int16 x1, signed int16 y1 , int1 c){
int16 x;
int16 y;
unsigned int16 n;
int1 m_case;
x=abs(x1-x0);
y=abs(y1-y0);
if (y > x){
n=(y1-y0);
m_case=1;
} else {
n=(x1-x0);
m_case=0;
}
for(i=0 ; i<=n ; i++){
if (m_case){
y=i + y0;
x=(y*(x1-x0))/(y1-y0) + x0;
} else {
x=i + x0;
y=(x*(y1-y0))/(x1-x0) + y0;
}
glcd_pixel(x, y,c);
}
}
// glcd_square(x0,y0,x1,y1, c) sets square
void glcd_square( unsigned int8 x0, unsigned int8 y0,
unsigned int8 x1, unsigned int8 y1 , int1 c){
glcd_line(x0,y0, x1,y0, c);
glcd_line(x1,y0, x1,y1, c);
glcd_line(x0,y1, x1,y1, c);
glcd_line(x0,y0, x0,y1, c);
}
// glcd_box(x0,y0,x1,y1, c)
void glcd_box( unsigned int8 x0, unsigned int8 y0,
unsigned int8 x1, unsigned int8 y1 , int1 c){
unsigned int8 x;
unsigned int8 y;
for(y=y0; y<=y1;y++){
for(x=x0; x<=x1;x++){
if((!(x%8)) && ((x1-x)>8)){
glcd_pixel8(x,y,0xFF*c); //Same time to write 8 pixel
x +=7 ;
} else {
glcd_pixel(x,y,c);
}
}
}
}
//glcd_image8 (*Pic, x, y, size_x, size_y)
void glcd_image8(int8 *pic_px, unsigned int8 x, unsigned int8 y,
unsigned int8 size_x, unsigned int8 size_y){
unsigned int8 px_y;
unsigned int8 px_x;
unsigned int8 px=0;
for(px_y=y; px_y<(y+size_y); px_y++){
for(px_x=x; px_x<(x+size_x); px_x+=8){
glcd_pixel8(px_x, px_y, *(pic_px+px));
px+=1;
}
}
}
#use fast_io(D)
|
The data port is still PortD.
Thank you |
|
![](templates/subSilver/images/spacer.gif) |
PCM programmer
Joined: 06 Sep 2003 Posts: 21708
|
|
![](templates/subSilver/images/spacer.gif) |
assaad
Joined: 09 Dec 2009 Posts: 37
|
|
Posted: Tue May 25, 2010 1:53 am |
|
|
thank you PCM for fast reply
I did what you said ,
infact the main problem was in the header structure of LCD
the old one was :
Code: |
struct lcd_pin_def
{
BOOLEAN unused1; // j0
BOOLEAN unused2; // j1
BOOLEAN unused3; // j2
BOOLEAN unused4; // j3
BOOLEAN w_bar; // j4 Write bar active low
BOOLEAN r_bar; // j5 Read bar active low
BOOLEAN cd; // j6 Command/Data BAR 1=command 0=data
BOOLEAN reset_bar; // j7 Reset active low
int data : 8; // PortD=Data bus
};
struct lcd_pin_def LCD;
#byte LCD = 0xf88 // portj address on 18F8722
|
lcd.data was mapped to LATA
so I have to change it to
Code: |
struct lcd_pin_def
{
int data : 8; // PortD=Data bus
int unused_data1 : 8; // Porte
int unused_data2 : 8; // Portf
int unused_data3 : 8; // Portg
int unused_data4 : 8; // Porth
BOOLEAN unused1; // j0
BOOLEAN unused2; // j1
BOOLEAN unused3; // j2
BOOLEAN unused4; // j3
BOOLEAN w_bar; // j4 Write bar active low
BOOLEAN r_bar; // j5 Read bar active low
BOOLEAN cd; // j6 Command/Data BAR 1=command 0=data
BOOLEAN reset_bar; // j7 Reset active low
};
struct lcd_pin_def LCD;
#byte LCD = 0xf83 // portd address on 18F8722
|
now it works , but is there any other simpler way to define lcd.data as portd in the old structure ?
Thank you |
|
![](templates/subSilver/images/spacer.gif) |
kurusaray19
Joined: 22 Dec 2011 Posts: 1
|
|
Posted: Thu Dec 22, 2011 3:52 am |
|
|
Hello. I have a question you would have friends. I need the code according to the chart below. glcd winstar WG24064A. PIC 18F8722 for.
WR=E3
RD=E4
CE=E5
CD=E6
RST=E7
DATA PINS = PORTD |
|
![](templates/subSilver/images/spacer.gif) |
CeMiL_mktrnk
Joined: 21 Mar 2012 Posts: 4
|
|
Posted: Wed Mar 21, 2012 8:13 am |
|
|
noyz wrote: | Code: |
//// Connections are as follows: ////
//// /WR - - C4 ////
//// /RD - - C5 ////
//// C//D- - C6 ////
//// /RST- - C7 ////
//// DATA0-7 PORTD0-7 ////
//// LCD's FS is tied low (FS = 0 is 8x8 font) ////
|
How can I change this?
I have a board already connected and need to redefine those.
For example the data pins from glcd are H0-H7 instead d0-d7 on pic.
Pic used is 18f8527. |
data pins from glcd are B0-B7 instead d0-d7 on pic.
Pic used is 18f4620.
But control pins arent all any port. For example I use d3, d2, d1 and d7 pins for data write, data read, C/D and reset, I use d0, d4, d5 for SPI. Also I will connect MS2 to e1 and FS1 to e2.
Can you send me upgrated driver or explain where I have to change?
Please help me urgently |
|
![](templates/subSilver/images/spacer.gif) |
CeMiL_mktrnk
Joined: 21 Mar 2012 Posts: 4
|
|
Posted: Mon Mar 26, 2012 2:19 am |
|
|
Is there anybody who can help me? It is urgent. |
|
![](templates/subSilver/images/spacer.gif) |
|
|
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
|
Powered by phpBB © 2001, 2005 phpBB Group
|