CCS C Software and Maintenance Offers
FAQFAQ   FAQForum Help   FAQOfficial CCS Support   SearchSearch  RegisterRegister 

ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

CCS does not monitor this forum on a regular basis.

Please do not post bug reports on this forum. Send them to CCS Technical Support
switch between applications

 
Post new topic   Reply to topic    CCS Forum Index -> General CCS C Discussion
View previous topic :: View next topic  
Author Message
LFern



Joined: 16 Mar 2011
Posts: 19
Location: Melbourne, Australia

View user's profile Send private message

switch between applications
PostPosted: Mon Jul 25, 2011 1:49 am     Reply with quote
Hi All,


I have two applications running on a single PIC24FJ64GA004 chip.
One is a bootloader and other one is the real application. I need to set a flag programmatically somewhere on the MCU and upon reset, application can check the flag. If it is set, it can go in to bootloader again and if not can run the rest of the application.

I used program memory flag on MCU, but it seems not working properly. Any ideas to do this functionality?

Worst case is to use an ext eeprom.

pls let me know your ideas.
Display posts from previous:   
Post new topic   Reply to topic    CCS Forum Index -> General CCS C Discussion All times are GMT - 6 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


Powered by phpBB © 2001, 2005 phpBB Group