bye for now.

treitmey · Joined: 23 Jan 2004 Posts: 1094 Location: Appleton,WI USA

Today I accepted a job doing hardware engineering, but using the
Atmel ATmega processors.

Chances are I won't be on this board very much. Crying or Very sad

If you need to get a hold of me do a PM.

Otherwise, thanks for all the help over the years.

Rohit de Sa · Joined: 09 Nov 2007 Posts: 282 Location: India

Atmel?? Aww c'mon! Razz

Woody · Joined: 11 Sep 2003 Posts: 76 Location: Warmenhuizen - NL

Good luck in your new job and thanks for all the useful information you supplied over the last few years; I used it often in my projects.

Paul

Ttelmah · Guest

I'd definately make a point of dropping in sometimes though. I have spent many months at a time working with other processors, but still use PICs if I want to put something small together, quickly.

Currently working on a project using an 80x6 'core' in a FPGA, together with two z80's implemented the same way, but have still managed to include half a dozen small PICs to perform some of the basic logic. They worked out cheaper than moving to a larger FPGA, and inluding more processing in this, and much quicker to develop.

Always a pity to see any of the regulars leaving, but 'very best wishes', both for the job, and for Christmas/New Year.

Best Wishes

treitmey · Joined: 23 Jan 2004 Posts: 1094 Location: Appleton,WI USA

Thanks again for all the appreciation.

bkamen · Posted: Fri Dec 18, 2009 1:38 pm

I thought Microchip bought out atmel. (EDIT: Well, the Atmel Microcontrollers anyway - not like ALL of Atmel)

Anyway - I've looked into their stuff before..

I remember one of the specs for the ADC on one of the MPU to be 10bits with an error of +-4lsb.

Hahahaha..

Good luck at the new J-O-B.

-Ben
_________________
Dazed and confused? I don't think so. Just "plain lost" will do. :D

newguy · Joined: 24 Jun 2004 Posts: 1903

Best wishes and good luck with the new job.

arunb · Joined: 08 Sep 2003 Posts: 492 Location: India

good luck with the new job.

thanks
arunb

asmallri · Joined: 12 Aug 2004 Posts: 1634 Location: Perth, Australia

Good luck - I am sure you will check in on us from time to time.

All the best
_________________
Regards, Andrew

http://www.brushelectronics.com/software
Home of Ethernet, SD card and Encrypted Serial Bootloaders for PICs!!

Ken Johnson · Joined: 23 Mar 2006 Posts: 197 Location: Lewisburg, WV

I scan this forum frequently, both for new ideas and good ol' general education - wish I could contribute more

So, thank you triet, and many many others. Add hope you enjoy your new endeavors !

Ken

Humberto · Posted: Sun Dec 20, 2009 12:24 pm

treitmey,

It is not a good new to know that you leave, I wish you the best in your new endeavor.
I appreciate your contribution to this forum and keep expecting your next thread called: "Me again!!!"

Kind regards

Humberto

kender · Joined: 09 Aug 2004 Posts: 768 Location: Silicon Valley

Thank you for all your posts and help.
Good luck at the new job!
We'll miss you.
_________________
Read the label, before opening a can of worms.

ccs viewer · Guest

owww man,,,
i felt lost Crying or Very sad

ELCouz · Joined: 18 Jul 2007 Posts: 427 Location: Montreal,Quebec

farewell treitmey! Smile

I wish you great success in your new career!

Happy Holidays and please come back often Wink

Best Regards,
Laurent