CCS C Software and Maintenance Offers
FAQFAQ   FAQForum Help   FAQOfficial CCS Support   SearchSearch  RegisterRegister 

ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

CCS does not monitor this forum on a regular basis.

Please do not post bug reports on this forum. Send them to support@ccsinfo.com
Using RTC chip as an alarm to wake up PIC

 
Post new topic   Reply to topic    CCS Forum Index -> General CCS C Discussion
View previous topic :: View next topic  
Author Message
MILMAN
Guest
Using RTC chip as an alarm to wake up PIC
PostPosted: Thu Jul 02, 2009 4:14 am     Reply with quote
Hello,

I am building a circuit that can be programmed to 'wake up' at certain times through out the day, collect data and then go to sleep mode.

I am having a lot of trouble even setting the RTC chip to tell the correct time, and I don't really know how to deal with different months/leap years etc. I have got hold of the code below from someone who has now left the department I work in (so can't ask for help) and have modified it a bit, but to be honest I don't understand much or any of what it is really doing?

If anyone could provide a brief explanation of this or another approach to implementing the time-based data collection idea I would be very grateful. Sorry this is a bit of a vague request,

any help much appreciated,

Cheers Smile

Code:
byte   day,month,year,hours,minutes,seconds;

void init_rtc()
{
    

   i2c_start();
   i2c_write(0xa0 | RTC_chip_add<<1);
   i2c_write(0x00);
   i2c_write(0x00);
   i2c_stop();
   delay_ms(11);
   
}

unsigned int get_low_bcd(unsigned int in_char)   // char lower nibble to bcd
   {
      return((in_char&0x7f)-48);
   }


separate

void set_time_and_date()
{
   byte   unitday,tenday,unitmonth,tenmonth,tenyear,unityear;
   byte   unithours,tenhours,unitminutes;
   byte   tenminutes,unitseconds,tenseconds;

   unitseconds=get_low_bcd(rtc_buffer[16]);
   tenseconds=get_low_bcd(rtc_buffer[15]);
   unitminutes=get_low_bcd(rtc_buffer[13]);
   tenminutes=get_low_bcd(rtc_buffer[12]);
   unithours=get_low_bcd(rtc_buffer[10]);
   tenhours=get_low_bcd(rtc_buffer[9]);
   unityear=get_low_bcd(rtc_buffer[7]);
   tenyear=get_low_bcd(rtc_buffer[6]);
   unitmonth=get_low_bcd(rtc_buffer[4]);
   tenmonth=get_low_bcd(rtc_buffer[3]);
   unitday=get_low_bcd(rtc_buffer[1]);
   tenday=get_low_bcd(rtc_buffer[0]);

   i2c_start();
   i2c_write(0xa0 | RTC_chip_add<<1);
   i2c_write(0x02);
   i2c_write((tenseconds * 16) + unitseconds);
   i2c_write((tenminutes * 16) + unitminutes);
   i2c_write((tenhours * 16) + unithours);
   i2c_write((unityear * 64) + (tenday * 16) + unitday);
   i2c_write((tenmonth * 16) + unitmonth);
   i2c_stop();
   delay_ms(11);

   fprintf(PC,"\f RTC written ...");
   lcd_init();
   printf(lcd_putc, "\n RTC written ...");
   
}

separate
void read_time_and_date()
{
   byte   dummy;

   fprintf(PC,"reading RTC from hardware...\n\r");

   i2c_start();
   i2c_write(0xa0 | RTC_chip_add<<1);
   i2c_write(0x02);
   i2c_start();
   i2c_write(0xa1 | RTC_chip_add<<1);
   seconds = i2c_read();
   minutes = i2c_read();
   hours = i2c_read();
   day = i2c_read();
   month = i2c_read();
   for(i=0;i<5;i++)
      dummy = i2c_read();
   i2c_stop();
   delay_ms(11);

   delay_ms(200);
   year = ((day&0xc0)/64)&0x03;
   day = (((day / 16) & 0x03) * 10) + (day & 0x0f);
   month = (((month / 16) & 0x01) * 10) + (month & 0x0f);
   hours = (((hours / 16) & 0x03) * 10) + (hours & 0x0f);
   minutes = (((minutes / 16) & 0x0f) * 10) + (minutes & 0x0f);
   seconds = (((seconds / 16) & 0x0f) * 10) + (seconds & 0x0f);

   fprintf(PC,"writing RTC to monitor ...\n\r");
   fprintf(PC,"year .. %3u\n\r",year);
   fprintf(PC,"month .. %3u\n\r",month);
   fprintf(PC,"day .. %3u\n\r",day);
   fprintf(PC,"hours .. %3u\n\r",hours);
   fprintf(PC,"minutes .. %3u\n\r",minutes);
   fprintf(PC,"seconds .. %3u\n\r",seconds);

   
}
MILMAN
Guest
PostPosted: Thu Jul 02, 2009 4:22 am     Reply with quote
Also the RTC chip I am using is PCF8583 and using PIC16F76. Thanks.
PCM programmer



Joined: 06 Sep 2003
Posts: 21708

View user's profile Send private message

PostPosted: Thu Jul 02, 2009 10:35 am     Reply with quote
There is a pcf8583 driver here, though it doesn't include alarm functions:
http://www.ccsinfo.com/forum/viewtopic.php?t=27988
It has a test program, and links to schematics.

If you have any questions about the driver, ask them here in this thread
(not in the driver thread).
MILMAN
Guest
PostPosted: Fri Jul 03, 2009 8:39 am     Reply with quote
Thank you so much. That has helped me loads!

I stupidly overlooked the fact that I had set the PCF8583 i2c address to 0xA2 as well so thanks for the note. It has also highlighted that it would have been a lot better if I had used the DS1307 chip, but o well, will know in the future!

Thanks again.
Display posts from previous:   
Post new topic   Reply to topic    CCS Forum Index -> General CCS C Discussion All times are GMT - 6 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


Powered by phpBB © 2001, 2005 phpBB Group