CCS C Software and Maintenance Offers
FAQFAQ   FAQForum Help   FAQOfficial CCS Support   SearchSearch  RegisterRegister 

ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

CCS does not monitor this forum on a regular basis.

Please do not post bug reports on this forum. Send them to CCS Technical Support
How to run my init code before ccs init code ?

 
Post new topic   Reply to topic    CCS Forum Index -> General CCS C Discussion
View previous topic :: View next topic  
Author Message
drolleman



Joined: 03 Feb 2011
Posts: 116

View user's profile Send private message

How to run my init code before ccs init code ?
PostPosted: Sat Sep 01, 2018 8:54 pm     Reply with quote
Before ccs initializes things like the uart I want my init code to run first. How do I do this?

What I need to do is to set outputs as quick as possible.

thx David
PCM programmer



Joined: 06 Sep 2003
Posts: 21708

View user's profile Send private message

PostPosted: Sat Sep 01, 2018 9:58 pm     Reply with quote
See the items in bold below:
Quote:
#include <18F46K22.h>
#device NO_DIGITAL_INIT
#fuses INTRC_IO, NOWDT, BROWNOUT, PUT, NOPBADEN
#use delay(clock=4M)
#use rs232(baud=9600, UART1, ERRORS, NOINIT)

//=================================
void main(void)
{


while(TRUE);
}

These are described in the CCS manual:
http://www.ccsinfo.com/downloads/ccs_c_manual.pdf
drolleman



Joined: 03 Feb 2011
Posts: 116

View user's profile Send private message

PostPosted: Sat Sep 01, 2018 11:20 pm     Reply with quote
Thank you.

It still uses 4, but I can live with that.
Display posts from previous:   
Post new topic   Reply to topic    CCS Forum Index -> General CCS C Discussion All times are GMT - 6 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


Powered by phpBB © 2001, 2005 phpBB Group