CCS C Software and Maintenance Offers
FAQFAQ   FAQForum Help   FAQOfficial CCS Support   SearchSearch  RegisterRegister 

ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

CCS does not monitor this forum on a regular basis.

Please do not post bug reports on this forum. Send them to support@ccsinfo.com
Question about RS485 driver file

 
Post new topic   Reply to topic    CCS Forum Index -> General CCS C Discussion
View previous topic :: View next topic  
Author Message
stoyanoff



Joined: 20 Jul 2011
Posts: 375

View user's profile Send private message

Question about RS485 driver file
PostPosted: Mon May 18, 2015 12:40 pm     Reply with quote
Greetings! I'm looking at RS485.c driver file. This is part of the send message procedure:
Code:

 for(try=0; try<5; ++try) {
      rs485_collision = 0;
      fputc((int16)0x100|rs485_id, RS485_CD);
      fputc((int16)0x100|to, RS485_CD);
      fputc(len, RS485_CD);

      for(i=0, cs=rs485_id^to^len; i<len; ++i) {
         cs ^= *data;
         fputc(*data, RS485_CD);
         ++data;
      }

      fputc(cs, RS485_CD);
      if(!rs485_collision) {
         ret = TRUE;
         break;
      }
      delay_ms(RS485_ID);
   }

Can anyone explain to me how it finds if there is a collision?
Thanks!
Ttelmah



Joined: 11 Mar 2010
Posts: 19469

View user's profile Send private message

PostPosted: Mon May 18, 2015 1:07 pm     Reply with quote
rs485_collision, is defined at the start of the file as bit 6 of the RS235_ERRORS byte. This byte is automatically updated by the CCS RS232 driver when a putc is performed.
Display posts from previous:   
Post new topic   Reply to topic    CCS Forum Index -> General CCS C Discussion All times are GMT - 6 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


Powered by phpBB © 2001, 2005 phpBB Group