CCS C Software and Maintenance Offers
FAQFAQ   FAQForum Help   FAQOfficial CCS Support   SearchSearch  RegisterRegister 

ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

CCS does not monitor this forum on a regular basis.

Please do not post bug reports on this forum. Send them to CCS Technical Support
Saving and restoring data EEPROM files to PC for production

 
Post new topic   Reply to topic    CCS Forum Index -> CCS ICD / Mach X / Load-n-Go
View previous topic :: View next topic  
Author Message
tonymcc



Joined: 27 Jul 2010
Posts: 15
Location: Northampton UK Home of the 'Big Sheds'

View user's profile Send private message

Saving and restoring data EEPROM files to PC for production
PostPosted: Thu Jan 20, 2011 4:06 pm     Reply with quote
Hi

Compiler is PCWHD V4.114, ICD-U64 running under V4.027, V2.87 firmware and Rev 2 hardware.

I used to use an ICD2 under MPLAB and was able to EXPORT and IMPORT data EEPROM files to set up 'standard' calibration conditions prior to fine tuning during test and commissioning. I have rtff and find a few similar posts from several years ago, all sitting there, still lonely. If the answer is so obvious that I shouldn't ask the question, please put me out of my misery.

Thanks in advance
Tony
Display posts from previous:   
Post new topic   Reply to topic    CCS Forum Index -> CCS ICD / Mach X / Load-n-Go All times are GMT - 6 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


Powered by phpBB © 2001, 2005 phpBB Group