View previous topic :: View next topic |
Author |
Message |
Bonz099
Joined: 31 Jan 2010 Posts: 1
|
MachX and MPLAB |
Posted: Sun Jan 31, 2010 9:40 pm |
|
|
Hey Guys, just getting started in the PIC dev world and had some questions. I can't seem to get my MachX Programmer to be recognized within the MPLAB software. When I goto the drop down the selection for it isn't there.
I searched the forums but didn't find a topic on it, so if this is a duplicate post, my apologies.
Edit: I have the driver installed for the programmer, and the CCSLoad Application sees it just fine. |
|
|
TheMattster
Joined: 11 Jun 2010 Posts: 5 Location: Chicago area
|
New to it myself... |
Posted: Fri Jun 11, 2010 7:51 am |
|
|
Hi Bonz099 - I'm new to the CCS experience myself, but I've been programming PICs for a long, LONG time.
From what I gather the CCS programmers/debuggers only work with the CCS environment, not MPLAB. There is a way to tell MPLAB what kinds of debugging devices it can use, and the order they are listed, but I can't remember how to do it.
If you want to use MPLAB, use Microchip programmers/debuggers.
Hope this helps.
-Matt |
|
|
|