CCS C Software and Maintenance Offers
FAQFAQ   FAQForum Help   FAQOfficial CCS Support   SearchSearch  RegisterRegister 

ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

CCS does not monitor this forum on a regular basis.

Please do not post bug reports on this forum. Send them to CCS Technical Support
icd u40 breakpoints

 
Post new topic   Reply to topic    CCS Forum Index -> CCS ICD / Mach X / Load-n-Go
View previous topic :: View next topic  
Author Message
patrick
Guest
icd u40 breakpoints
PostPosted: Thu Oct 09, 2008 5:07 pm     Reply with quote
Hello

how many breakpoints are possible with the ICD U40 debugger?
Can i stop debugging on a point and then run it again?
PCM programmer



Joined: 06 Sep 2003
Posts: 21708

View user's profile Send private message

PostPosted: Tue Oct 21, 2008 5:42 pm     Reply with quote
CCS doesn't post the ICD-U40 manual online. But, it has to be similar
to the Microchip ICD2. Here's the manual for the ICD2:
http://ww1.microchip.com/downloads/en/DeviceDoc/51331c.pdf

On page 35 (page 41 in the Acrobat reader), it says:
Quote:
2.7.2.2 BREAKPOINTS
Note: For most devices, only one breakpoint will be set
(active) at a time, although you may specify more
than one breakpoint in the breakpoint dialog (i.e., one
breakpoint will be active and the others will be
inactive).
Display posts from previous:   
Post new topic   Reply to topic    CCS Forum Index -> CCS ICD / Mach X / Load-n-Go All times are GMT - 6 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


Powered by phpBB © 2001, 2005 phpBB Group