CCS C Software and Maintenance Offers
FAQFAQ   FAQForum Help   FAQOfficial CCS Support   SearchSearch  RegisterRegister 

ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

CCS does not monitor this forum on a regular basis.

Please do not post bug reports on this forum. Send them to CCS Technical Support
RBport on change interrupt problem

 
Post new topic   Reply to topic    CCS Forum Index -> CCS ICD / Mach X / Load-n-Go
View previous topic :: View next topic  
Author Message
Guest
RBport on change interrupt problem
PostPosted: Fri Jan 20, 2006 4:48 pm     Reply with quote
When I enable the interrupt and put the pic to sleep, it wake up and enter to the ISR before I push a key. Is there something I have to do before enable the port interrupt? I'm using the ICD debugger (with port b internal pull ups): is this the problem?

I have 16F876 PIC, 3.19 compiler version, 3.43 IDE version.

P.S: sorry for my bad english.
Display posts from previous:   
Post new topic   Reply to topic    CCS Forum Index -> CCS ICD / Mach X / Load-n-Go All times are GMT - 6 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


Powered by phpBB © 2001, 2005 phpBB Group