CCS C Software and Maintenance Offers
FAQFAQ   FAQForum Help   FAQOfficial CCS Support   SearchSearch  RegisterRegister 

ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

CCS does not monitor this forum on a regular basis.

Please do not post bug reports on this forum. Send them to CCS Technical Support
MPLAB SIM PIC18F4620

 
Post new topic   Reply to topic    CCS Forum Index -> CCS ICD / Mach X / Load-n-Go
View previous topic :: View next topic  
Author Message
Al Boulton
Guest
MPLAB SIM PIC18F4620
PostPosted: Fri Jun 02, 2006 2:43 am     Reply with quote
Trying to run some code through MPLAB SIM, when I try to use a watch window on local or global variables, I get a 'restricted memory' message for everything.
Program has been built with debug options on and tried with both .cod & .cof debug files.

Any ideas would be greatly appreciated
haihong
Guest
Restricted memory
PostPosted: Sun Jul 16, 2006 10:46 am     Reply with quote
MPLAB IDE --> Project --> Build Options --> Project : select tab "MPLAB LINK30", check "Link for ICD2"
Display posts from previous:   
Post new topic   Reply to topic    CCS Forum Index -> CCS ICD / Mach X / Load-n-Go All times are GMT - 6 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


Powered by phpBB © 2001, 2005 phpBB Group