 |
 |
| View previous topic :: View next topic |
| Author |
Message |
batacarco
Joined: 23 Apr 2014
Posts: 5
|
| problems USB CDC WINDOWS 7 64 bits |
 Posted: Tue Jul 01, 2014 8:17 pm |
 |
|
hi everybody
Currently I have problems with recognizing the PIC18f4550 with the Device Manager on my computer windows 7 - 64bit
Explain the problematic:
I started the project two years ago with XP and both "bootloader_usb" as the main "USB-CDC" program worked correctly (COM7 "bootloader_usb" and COM8 "USB-CDC").
Now with windows 7-64bit, the device manager only identifies the usb_bootloader as COM7, but when the PIC works with the main progam (USB-CDC) shows "unknown device".
It's rare but if I load it from XP and I check the device manager in W7-64bit if it works.
Perform a FILE COMPARE with the same compiled program HEX (hex-XP / hex-W7-64bits), that if they are different in a few lines ..... ppppffff
CCS version 4.125
Anyone can guide me
THKS  |
|
 |
Ttelmah
Joined: 11 Mar 2010
Posts: 19524
|
|
| Posted: Wed Jul 02, 2014 1:32 am |
|
|
Your compiler is late enough, that it should include the 64bit driver. You _manually_ have to point the device at the file though.
It sits in the CCS director/driver/NT,2000,XP,VISTA,7
and is called cdc_NTXPVista.inf
Go to the unknown device, select 'update driver', and then browse to this file and select it. Hopefully the device will then be recognised. |
|
|
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
|
Powered by phpBB © 2001, 2005 phpBB Group
|
FAQ 
Search
Register
Profile 
Log in to check your private messages 
Log in
