CCS C Software and Maintenance Offers
FAQFAQ   FAQForum Help   FAQOfficial CCS Support   SearchSearch  RegisterRegister 

ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

CCS does not monitor this forum on a regular basis.

Please do not post bug reports on this forum. Send them to CCS Technical Support
Trouble in RS232 stream. v.5.021

 
Post new topic   Reply to topic    CCS Forum Index -> General CCS C Discussion
View previous topic :: View next topic  
Author Message
azand1



Joined: 04 Feb 2014
Posts: 9

View user's profile Send private message

Trouble in RS232 stream. v.5.021
PostPosted: Sat Mar 29, 2014 11:27 pm     Reply with quote
Trouble in RS232 stream.
In version 4.124 works. OK!!
In version 5.0 - 021, does not work.
I ask for help.
Obs: translated into English.

Code:

#include <18LF24J11.h>

#FUSES NOWDT
#FUSES INTRC_IO
#FUSES NOPROTECT
#FUSES RTCOSC_T1   

#use delay(clock=8000000)  // funcionou com 4Mhz
#use rs232(uart1,baud=4800,parity=N,bits=8,stream=buffer)


//char buffer[160];
rtc_time_t tWriteTime;
rtc_time_t tAlarmTime;

#int_RTC
void RTC_isr(void)
{
 rtc_alarm_read(&tAlarmTime);
//sprintf(buffer,"%02u:%02u:%02u",tAlarmTime.tm_hour,tAlarmTime.tm_min,tAlarmTime.tm_sec);  // not working
sprintf(buffer,"\n\r%02u/%02u/20%02u %02u:%02u:%02u",tAlarmTime.tm_mon,tAlarmTime.tm_mday,tAlarmTime.tm_year,tAlarmTime.tm_hour,tAlarmTime.tm_min,tAlarmTime.tm_sec); // not working
printf("%s\n\r",buffer);

}

void main()
{

 delay_ms(1000);

   tWriteTime.tm_year = 9;
   tWriteTime.tm_mon  = 11;
   tWriteTime.tm_mday = 24;
   tWriteTime.tm_wday = 2;
   tWriteTime.tm_hour = 16;
   tWriteTime.tm_min  = 1;
   tWriteTime.tm_sec  = 0;

   tAlarmTime.tm_year = 9;
   tAlarmTime.tm_mon  = 11;
   tAlarmTime.tm_mday = 24;
   tAlarmTime.tm_wday = 2;
   tAlarmTime.tm_hour = 16;
   tAlarmTime.tm_min  = 1;
   tAlarmTime.tm_sec  = 5;

   setup_rtc(RTC_ENABLE | RTC_OUTPUT_SECONDS, 0x00);
   setup_rtc_alarm(RTC_ALARM_ENABLE, RTC_ALARM_HOUR|RTC_ALARM_MINUTE|RTC_ALARM_SECOND, 10);
   rtc_write(&tWriteTime);
   rtc_alarm_write(&tAlarmTime);
   enable_interrupts(GLOBAL);
   enable_interrupts(int_rtc);
  //
   rtc_read(&tWriteTime);
  sprintf(buffer,"\n\r%02u/%02u/20%02u %02u:%02u:%02u",tWriteTime.tm_mon,tWriteTime.tm_mday,tWriteTime.tm_year,tWriteTime.tm_hour,tWriteTime.tm_min,tWriteTime.tm_sec);
  printf("%s\n\r",buffer);


   while(1)
   {
   }
}
PCM programmer



Joined: 06 Sep 2003
Posts: 21708

View user's profile Send private message

PostPosted: Sun Mar 30, 2014 12:32 am     Reply with quote
Is your basic complaint that sprintf doesn't work with the 18LF24J11 with
vs. 5.021 ?

It worked for me. I cleaned up your program. I did not name the
stream as "buffer" and then try to send sprintf output to the stream.
That's not supported. It's not in the CCS manual.

I compiled the following test program with vs. 5.021, then I ran it in
MPLAB simulator with the RS232 output sent to the Output Window.
It displays this:
Quote:
11/24/2009 16:01:00

It's working.

Here is the test program:
Code:

#include <18LF24J11.h>
#FUSES NOWDT
#FUSES INTRC_IO
#FUSES NOPROTECT
#FUSES RTCOSC_T1   

#use delay(clock=8000000)   
#use rs232(uart1,baud=4800,parity=N,bits=8)

char buffer[160];
rtc_time_t tWriteTime;
rtc_time_t tAlarmTime;


void main()
{
   tWriteTime.tm_year = 9;
   tWriteTime.tm_mon  = 11;
   tWriteTime.tm_mday = 24;
   tWriteTime.tm_wday = 2;
   tWriteTime.tm_hour = 16;
   tWriteTime.tm_min  = 1;
   tWriteTime.tm_sec  = 0;

   tAlarmTime.tm_year = 9;
   tAlarmTime.tm_mon  = 11;
   tAlarmTime.tm_mday = 24;
   tAlarmTime.tm_wday = 2;
   tAlarmTime.tm_hour = 16;
   tAlarmTime.tm_min  = 1;
   tAlarmTime.tm_sec  = 5;

  sprintf(buffer,"\n\r%02u/%02u/20%02u %02u:%02u:%02u",tWriteTime.tm_mon,tWriteTime.tm_mday,tWriteTime.tm_year,tWriteTime.tm_hour,tWriteTime.tm_min,tWriteTime.tm_sec);
  printf("%s\n\r", buffer);


   while(1)
   {
   }
 
}
bkamen



Joined: 07 Jan 2004
Posts: 1615
Location: Central Illinois, USA

View user's profile Send private message

PostPosted: Mon Mar 31, 2014 10:53 am     Reply with quote
I would agree..


S-printf means "STRING" not stream at last I recall.

you use FPRINTF to print to a stream typically.

I'm not using 5.x yet, but the code you supplied already shows a disconnect between what you think you can do with printf in the f- and s- form.


if I were using both for some reason it would go more like this: (not a compilable example)

Code:

#use rs232(uart1,baud=4800,parity=N,bits=8,stream=COM1)

char buffer [160];

sprintf(buffer, "some string with stuff in it\r\n");
fprintf(COM1, buffer);



I probably wouldn't do exactly as shown above since fprintf can take sprintf syntax. If I were to bother using sprintf and then fprintf like that above, it'd be because I was doing something more complex than that.. but you get the idea.

check the PIC-C manual for more.

-Ben
_________________
Dazed and confused? I don't think so. Just "plain lost" will do. :D
Display posts from previous:   
Post new topic   Reply to topic    CCS Forum Index -> General CCS C Discussion All times are GMT - 6 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


Powered by phpBB © 2001, 2005 phpBB Group