View previous topic :: View next topic |
Author |
Message |
sezgin ozan
Joined: 05 Jan 2014 Posts: 8
|
canbus with pic18F66K80 |
Posted: Mon Jan 06, 2014 2:45 pm |
|
|
Hi
I have a project with PIC18F66K80, and uses canbus, but whatever I do, canbus does not work. If someone knows anything about PIC18F66K80 and CANBUS, and reply I would be glad.
sezgin ozan |
|
|
PCM programmer
Joined: 06 Sep 2003 Posts: 21708
|
|
Posted: Mon Jan 06, 2014 5:28 pm |
|
|
You have to post:
1. Your test program. Keep it short. It must compile with no errors
if we try to compile it.
2. Your CCS compiler version.
3. A link to the schematic for your board. If you built the board by
yourself, then post the schematic on a free image hosting website, and
post a link to it here.
If you do all those things, you have a chance to get some help. |
|
|
sezgin ozan
Joined: 05 Jan 2014 Posts: 8
|
|
Posted: Mon Jan 06, 2014 5:54 pm |
|
|
Thanks for your reply,
I have just find my mistake, it was about , seg1 and seg2 settings, with help of project wizard I found correct settings and the circuit worked well
sezgin ozan |
|
|
|