CCS C Software and Maintenance Offers
FAQFAQ   FAQForum Help   FAQOfficial CCS Support   SearchSearch  RegisterRegister 

ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

CCS does not monitor this forum on a regular basis.

Please do not post bug reports on this forum. Send them to CCS Technical Support
read SMS

 
Post new topic   Reply to topic    CCS Forum Index -> General CCS C Discussion
View previous topic :: View next topic  
Author Message
idm852



Joined: 09 Apr 2013
Posts: 4

View user's profile Send private message

read SMS
PostPosted: Tue Apr 09, 2013 9:40 am     Reply with quote
hi
I want to Extract the contents of an sms received by my modem.
I do not control perfectly the PCW compiler for that I can not store characters received RS232 in a table. In fact, I receive this frame which I want to extract the date and sender number and content of SMS. for example, if I receive this frame:

+CMGL: 1,"REC UNREAD","+85291234567",,"07/02/18,00:05:10+32"
Reading text messages is easy.

I want to store the date in a table TD, the time in another table TH and TC content in a table for later use

TD : 07/02/18
TH: 00:05:10
TC: Reading text messages is easy.

Best Regards


idm852



Joined: 09 Apr 2013
Posts: 4

View user's profile Send private message

PostPosted: Tue Apr 09, 2013 9:57 am     Reply with quote
I use PIC18F2550 and GL865.
I can communicate with the module for sending and receiving. My problem is that after sending the command "AT + CMGR = 1 \ r" I want to store the received frame in table then use this table to retrieve the date, time and message in the other tables.

Can you help me???????
ezflyr



Joined: 25 Oct 2010
Posts: 1019
Location: Tewksbury, MA

View user's profile Send private message

PostPosted: Tue Apr 09, 2013 11:53 am     Reply with quote
Hi,

It's not that hard to do once you can actually receive the data from the GSM model following the +CMGR command.

I setup two arrays, MSG1 and MSG2, to handle the two lines of data returned from the modem. The returned data actually looks like this:

Code:

<CR><LF>+CMGR: "REC UNREAD","+19785551212","","11/12/09,09:04:24-20"<CR><LF>
Output 1 On<CR><LF>


So, you need to setup a reading loop that is 'aware' of the carriage returns <CR>, and linefeeds <LF> that are part of the data being sent, and then fill the two message arrays accordingly.

Here is part of the code to illustrate my technique:

Code:

do
   {
      if(bkbhit)
      {
         TempChar = bgetc();
         if (TempChar == '\r')
            iReturnIndex++;


         if ((iReturnIndex == 1) && (TempChar != '\r') && (TempChar != '\n'))
         {
            Msg1[ArrayIndex1] = TempChar;
            ArrayIndex1++;
            if (ArrayIndex1 > 70)
               return; //Msg1 buffer has overflowed, so exit the subroutine!
         }

// Code for the 2nd Message array goes here......

   } while (iReturnIndex < 4);


When this code executes, you'll have the 2 lines of data neatly in two arrays. Also, be sure to do this:

Code:

   // Here we null terminate the two Msg lines from the ADH8066 module
   Msg1[ArrayIndex1++] = '\0';
   Msg2[ArrayIndex2++] = '\0';


That should get you started!

John
idm852



Joined: 09 Apr 2013
Posts: 4

View user's profile Send private message

PostPosted: Tue Apr 09, 2013 3:05 pm     Reply with quote
bkbhit and bgetc ?
I put them in the code but the PCW Compiler does not accept.

undefined identifier bkbhit
undefined identifier bgetc
idm852



Joined: 09 Apr 2013
Posts: 4

View user's profile Send private message

PostPosted: Tue Apr 09, 2013 3:11 pm     Reply with quote
My plan is to store the received SMS and send them through a serial link (Xmit: B6, RCV: B7) to the computer in order and with a new layout as the context of the message, and then Date and time finally, the number of the sender.
Here is the core of my code:
Code:

#include <18F2550.h>
#fuses HS,NOWDT,NOPROTECT,NOLVP
#use delay(clock=20000000)
#use rs232(baud=9600, xmit=PIN_C6,rcv=pin_C7, parity=N,STREAM=GSM)
#use rs232(baud=9600, xmit=PIN_B6,rcv=pin_B7, parity=N, STREAM=PC)
#include <string.h>

void main()
{
output_low(PIN_b1);
output_low(PIN_b2);
output_low(PIN_b3);
output_low(PIN_b4);

while(true)
  {   
   output_low(PIN_b1);
   output_low(PIN_b2);
   output_low(PIN_b3);
   output_low(PIN_b4);
   delay_ms(1000);
   output_high(PIN_b1);
   fprintf(PC,"initialisation\r");
   delay_ms(1000);
   fprintf(GSM,"AT\r");
   delay_ms(1000);
   fprintf(GSM,"AT+IPR=9600\r");
   delay_ms(1000);
   output_high(PIN_b2);
   fprintf(GSM,"AT+CMGF=1\r");
   delay_ms(1000);
   fprintf(GSM,"AT+CMGR=1\r");
   delay_ms(2000);
         
   Receive();

   Send_PC();
  }
}
ezflyr



Joined: 25 Oct 2010
Posts: 1019
Location: Tewksbury, MA

View user's profile Send private message

PostPosted: Tue Apr 09, 2013 5:43 pm     Reply with quote
Hi,

I'm sorry, I misunderstood your earlier post and assumed that you were much further along with this project than you apparently are.....

I use a circular buffer to receive incoming data from the GSM modem, and bkbhit and bgetc are part of that code. Have a look at 'ex_sisr.exe' to see how it's done.

You definitely want to put the GSM modem on the hardware serial pot of the PIC, and your PC on a software serial port. You also want to add 'Errors' to the hardware serial port #use rs232 statement.

If some of this does not make sense, search the forum and the CCS provided example programs for the answers before asking here on the forum!

John
Display posts from previous:   
Post new topic   Reply to topic    CCS Forum Index -> General CCS C Discussion All times are GMT - 6 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


Powered by phpBB © 2001, 2005 phpBB Group