CCS C Software and Maintenance Offers
FAQFAQ   FAQForum Help   FAQOfficial CCS Support   SearchSearch  RegisterRegister 

ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

CCS does not monitor this forum on a regular basis.

Please do not post bug reports on this forum. Send them to support@ccsinfo.com
Programming 18F66J60 problem with Rbias

 
Post new topic   Reply to topic    CCS Forum Index -> General CCS C Discussion
View previous topic :: View next topic  
Author Message
stoyanoff



Joined: 20 Jul 2011
Posts: 375

View user's profile Send private message

Programming 18F66J60 problem with Rbias
PostPosted: Sat Mar 10, 2012 9:10 am     Reply with quote
I have a pcb with ICSP output. Pin 53(Rbias) is connected to Vss throught 2.2k resistor. But in this case it cause a voltage drop to the programmer Vdd to 1.7V and it`s not enough for programming. Is my chip burned or this is normal???
asmallri



Joined: 12 Aug 2004
Posts: 1634
Location: Perth, Australia

View user's profile Send private message Send e-mail Visit poster's website

PostPosted: Sat Mar 10, 2012 9:34 am     Reply with quote
Sound like you have a home made PCB with a wiring fault.
_________________
Regards, Andrew

http://www.brushelectronics.com/software
Home of Ethernet, SD card and Encrypted Serial Bootloaders for PICs!!
stoyanoff



Joined: 20 Jul 2011
Posts: 375

View user's profile Send private message

PostPosted: Sat Mar 10, 2012 2:37 pm     Reply with quote
It's not home made pcb!
Display posts from previous:   
Post new topic   Reply to topic    CCS Forum Index -> General CCS C Discussion All times are GMT - 6 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


Powered by phpBB © 2001, 2005 phpBB Group