pic C programming help!

misterPJ · Joined: 12 Jan 2012 Posts: 4

errased

asmboy · Joined: 20 Nov 2007 Posts: 2128 Location: albany ny

is this ?
1- home work?
2- hobby?
3-hacking?
4- an actual design for some purpose other than the above ??
Very Happy

temtronic · Posted: Fri Jan 13, 2012 3:33 pm

missing some 'minor' details.

...like..

type of LCD ?
.serial?
..ttl?
..I2C ?
..SPI ?
.parallel?
.. 8 bit ?
..4 bit ?
.direct?

type of KPD ?
..muxed ?
..discrete ?
..3by4 ?
..4by4?

type of PIC ?
.16,18,24 series

version of compiler ?
.PCM,PCH,PCD ?

There is of course examples in the , well, 'examples' folder that CCS kindly supplies which would be a great start.....

misterPJ · Joined: 12 Jan 2012 Posts: 4

this is for my work
im using a easypic5 board
4x4 keypad
EEPROM
2x16 LCD display
im programming the board in C
if you guys could help me, im stuck on that piece of code

dyeatman · Joined: 06 Sep 2003 Posts: 1932 Location: Norman, OK

What processor and what compiler version?
_________________
Google and Forum Search are some of your best tools!!!!

temtronic · Posted: Fri Jan 13, 2012 7:08 pm

A quick look at that board says that it could hold any one of over 120 different PICs. Hmm.. my xtal ball is broken and I can't see which PIC you're using.

Sorry, but without specific information no one here can really help.

What I find 'interesting' is that you've come here asking for help which you obviously couldn't get from the mfr of the board. If you can't get support there, I strongly urge you to throw out that board and buy one of CCS's products. They WILL support what they sell !!

misterPJ · Joined: 12 Jan 2012 Posts: 4

I'm using mikroc pro for PIC compiler
I cant change the board I was assigned to work with this one
and its true there is no help at all in their manual, especially when it comes
to keypad usability
and i need to meet my deadline

i need to make my while(1) routine to work using the keypad to change my data and display in the lcd, any of you guys have any idea how to help

+++++++++++++++++++
MisterPJ,

Do not post questions about MikroC on the CCS forum.
Use their forum:
http://www.mikroe.com/forum/

You were warned here:
http://www.ccsinfo.com/forum/viewtopic.php?t=47185

One more time and you get the boot.

- Forum Moderator
++++++++++++++++++++