CLear line 2 of LCD only

pretyh8machin · Joined: 18 Oct 2011 Posts: 4

I was using the flex_lcd.c code foir a 2x16 lcd display and I was wandering if there's anyway to keep a message on the first line solid while I a software counter on the second line of the LCD to simulate a stopwatch?

btw is there anyway to write to an LCD where i can write from right to left while usiing the flex_lcd.c code ??
any help is appreciated. thank you in advance.

PCM programmer · Joined: 06 Sep 2003 Posts: 21708

Please don't start a new thread every day on the same lcd line 2 issue.
It's better to add new questions to your recent LCD thread.

pretyh8machin · Joined: 18 Oct 2011 Posts: 4

I forgot to mention I changed the increment portion of the code that labeled as a 6 to a 5 and i know this decrements the cursor but for some reason when I do this command my display message doesnt show up on the screen

PCM programmer · Joined: 06 Sep 2003 Posts: 21708

Here is your lcd thread from yesterday:
http://www.ccsinfo.com/forum/viewtopic.php?t=46561