CCS C Software and Maintenance Offers
FAQFAQ   FAQForum Help   FAQOfficial CCS Support   SearchSearch  RegisterRegister 

ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

CCS does not monitor this forum on a regular basis.

Please do not post bug reports on this forum. Send them to CCS Technical Support
How to generate four independent PWMs in the PIC18F4331

 
Post new topic   Reply to topic    CCS Forum Index -> General CCS C Discussion
View previous topic :: View next topic  
Author Message
aendereng



Joined: 17 Sep 2011
Posts: 2

View user's profile Send private message

How to generate four independent PWMs in the PIC18F4331
PostPosted: Sat Sep 17, 2011 7:13 am     Reply with quote
Hello everybody! I need your help to generate four independent PWM in the PIC18F4331. I tried to create this code in MikroC, but it does not support this module PWM POWER CONTROL . Then I would write this code in CCS, but I do not know how. Please if anyone know help me. Thanks, sorry my english I live in Brazil.
dyeatman



Joined: 06 Sep 2003
Posts: 1934
Location: Norman, OK

View user's profile Send private message

PostPosted: Sat Sep 17, 2011 10:56 am     Reply with quote
Before you start asking for help you should try a search. Searching this
board for 4 and PWM I found this that might help you:

http://www.ccsinfo.com/forum/viewtopic.php?t=37206

Pay close attention to the question further down the thread about multiple
PWMs with different frequencies. It tells you that the PIC16F4331 cannot
give you 4 completely independent PWMs and why.
_________________
Google and Forum Search are some of your best tools!!!!
aendereng



Joined: 17 Sep 2011
Posts: 2

View user's profile Send private message

PostPosted: Sat Sep 17, 2011 1:59 pm     Reply with quote
dyeatman wrote:
Before you start asking for help you should try a search. Searching this
board for 4 and PWM I found this that might help you:

http://www.ccsinfo.com/forum/viewtopic.php?t=37206

Pay close attention to the question further down the thread about multiple
PWMs with different frequencies. It tells you that the PIC16F4331 cannot
give you 4 completely independent PWMs and why.


dyeatman thanks for the help! I had seen the topic of the link you gave me.
Display posts from previous:   
Post new topic   Reply to topic    CCS Forum Index -> General CCS C Discussion All times are GMT - 6 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


Powered by phpBB © 2001, 2005 phpBB Group