CCS C Software and Maintenance Offers
FAQFAQ   FAQForum Help   FAQOfficial CCS Support   SearchSearch  RegisterRegister 

ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

CCS does not monitor this forum on a regular basis.

Please do not post bug reports on this forum. Send them to CCS Technical Support
dsPICpro4 - GLCD & 4x4 Keypad

 
Post new topic   Reply to topic    CCS Forum Index -> General CCS C Discussion
View previous topic :: View next topic  
Author Message
OcmLom



Joined: 17 Aug 2011
Posts: 1
Location: Sarajevo

View user's profile Send private message AIM Address Yahoo Messenger MSN Messenger

dsPICpro4 - GLCD & 4x4 Keypad
PostPosted: Wed Aug 17, 2011 7:39 am     Reply with quote
Well, i have a problem with the keypad. May someone post a init 4x4 keypad code for example defined for portF. I'm using dsPICpro4 with PIC30F6014A and CCS compiler. !
_________________
joooooooj
PCM programmer



Joined: 06 Sep 2003
Posts: 21708

View user's profile Send private message

PostPosted: Wed Aug 17, 2011 3:05 pm     Reply with quote
I don't know if this works on the PCD compiler, but here is a 4x4 keypad
driver for the PCM and PCH compilers:
http://www.ccsinfo.com/forum/viewtopic.php?t=28022&start=14

This thread has a discussion of how to correctly put pull-up resistors
on the row pins:
http://www.ccsinfo.com/forum/viewtopic.php?t=44647
Display posts from previous:   
Post new topic   Reply to topic    CCS Forum Index -> General CCS C Discussion All times are GMT - 6 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


Powered by phpBB © 2001, 2005 phpBB Group