CCS C Software and Maintenance Offers
FAQFAQ   FAQForum Help   FAQOfficial CCS Support   SearchSearch  RegisterRegister 

ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

CCS does not monitor this forum on a regular basis.

Please do not post bug reports on this forum. Send them to CCS Technical Support
pic18f4520 read_program_memory

 
Post new topic   Reply to topic    CCS Forum Index -> General CCS C Discussion
View previous topic :: View next topic  
Author Message
lhdicfind



Joined: 26 May 2012
Posts: 1

View user's profile Send private message

pic18f4520 read_program_memory
PostPosted: Sat May 26, 2012 9:45 pm     Reply with quote
Why not use pointer ?
Ttelmah



Joined: 11 Mar 2010
Posts: 19504

View user's profile Send private message

PostPosted: Sun May 27, 2012 1:01 am     Reply with quote
Because it is program memory, not RAM.
Remember in the PIC, two completely different memory spaces. The ram can be read with normal I/O operations, but the ROM has to be read using different instructions, and different addresses. So there is an address '0', in the ROM, and another address '0' in the RAM.

Best Wishes
Display posts from previous:   
Post new topic   Reply to topic    CCS Forum Index -> General CCS C Discussion All times are GMT - 6 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


Powered by phpBB © 2001, 2005 phpBB Group