CCS C Software and Maintenance Offers
FAQFAQ   FAQForum Help   FAQOfficial CCS Support   SearchSearch  RegisterRegister 

ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

CCS does not monitor this forum on a regular basis.

Please do not post bug reports on this forum. Send them to CCS Technical Support
problem with embedded ethernet board [solved]

 
Post new topic   Reply to topic    CCS Forum Index -> CCS ICD / Mach X / Load-n-Go
View previous topic :: View next topic  
Author Message
gkiesel



Joined: 22 May 2009
Posts: 8

View user's profile Send private message

problem with embedded ethernet board [solved]
PostPosted: Tue Jun 21, 2011 7:56 am     Reply with quote
Hi,

I am having trouble programming the embedded Ethernet (5V) test board from CCS. I just bought this. I can program the 3.3V embedded Ethernet board.

I can't detect the ID or the voltage for the embedded Ethernet (5V) test board. I can detect the ID and the voltage for the 3.3V embedded Ethernet board.

Any thoughts on why I can't program my new 5V embedded Ethernet test board?

Thanks,
Greg
gkiesel



Joined: 22 May 2009
Posts: 8

View user's profile Send private message

embarrasing solution
PostPosted: Tue Jun 21, 2011 1:05 pm     Reply with quote
plugged the programmer in the wrong port... Embarassed
Display posts from previous:   
Post new topic   Reply to topic    CCS Forum Index -> CCS ICD / Mach X / Load-n-Go All times are GMT - 6 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


Powered by phpBB © 2001, 2005 phpBB Group