CCS C Software and Maintenance Offers
FAQFAQ   FAQForum Help   FAQOfficial CCS Support   SearchSearch  RegisterRegister 

ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

CCS does not monitor this forum on a regular basis.

Please do not post bug reports on this forum. Send them to support@ccsinfo.com
ICD2 with CCS

 
Post new topic   Reply to topic    CCS Forum Index -> General CCS C Discussion
View previous topic :: View next topic  
Author Message
Bilal



Joined: 24 Apr 2010
Posts: 75
Location: Islamabad

View user's profile Send private message Send e-mail

ICD2 with CCS
PostPosted: Mon Mar 07, 2011 3:47 am     Reply with quote
Hi. I am using ccs compiler 4.093 and I am using ICD2 with this.
It work well with debugging.
The problem is I am unable to use ICD2 as a Programmer.
Every time it connects it start debugging.
Please help.
_________________
...
PCM programmer



Joined: 06 Sep 2003
Posts: 21708

View user's profile Send private message

PostPosted: Mon Mar 07, 2011 3:02 pm     Reply with quote
According to this thread, the Microchip ICD2 can only be used for
debugging with the CCS IDE (PCWH, etc.), and not as a programmer:
http://www.ccsinfo.com/forum/viewtopic.php?t=33186
Bilal



Joined: 24 Apr 2010
Posts: 75
Location: Islamabad

View user's profile Send private message Send e-mail

PostPosted: Tue Mar 08, 2011 1:50 am     Reply with quote
is there any way to use ICD2 as a programmer in CCS
_________________
...
Bilal



Joined: 24 Apr 2010
Posts: 75
Location: Islamabad

View user's profile Send private message Send e-mail

PostPosted: Tue Mar 08, 2011 2:13 am     Reply with quote
http://www.ccsinfo.com/newsdesk_info.php?newsdesk_id=86

in this page it is mention that we can switch b/w debugger to programmer..
any one please help
_________________
...
FvM



Joined: 27 Aug 2008
Posts: 2337
Location: Germany

View user's profile Send private message

PostPosted: Tue Mar 08, 2011 2:57 am     Reply with quote
Quote:
in this page it is mention that we can switch b/w debugger to programmer..

If so, ask CCS how it goes. For the time being, you may want to use Microchip MPLAB for programming. You also get a great simulator and a means to check CCS fuses settings against the manufacturer specification. It's useful in case of doubt.
Bilal



Joined: 24 Apr 2010
Posts: 75
Location: Islamabad

View user's profile Send private message Send e-mail

PostPosted: Wed Mar 09, 2011 4:01 am     Reply with quote
anyone has its solution please.. i want to use ICD2 as a programmer in CCS.. as mention in this page..
http://www.ccsinfo.com/newsdesk_info.php?newsdesk_id=86

if it is not possible then why they are mentioning it in this official page..
_________________
...
Display posts from previous:   
Post new topic   Reply to topic    CCS Forum Index -> General CCS C Discussion All times are GMT - 6 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


Powered by phpBB © 2001, 2005 phpBB Group