CCS :: View topic - PICC Wizard and 16F690

FAQ

Forum Help

Official CCS Support

Profile Log in to check your private messages Log in

CCS does not monitor this forum on a regular basis.

Please do not post bug reports on this forum. Send them to support@ccsinfo.com

PICC Wizard and 16F690

CCS Forum Index -> General CCS C Discussion

View previous topic :: View next topic

Author

Message

foxOnTheRun

Joined: 17 Apr 2010
Posts: 43

PICC Wizard and 16F690

Posted: Mon Dec 13, 2010 10:16 am

Hi, it's been a long time since my last wizard with PIC-C, I've seen that with version 4.114 the wizard for the 16F690 pic won't show any analog PINs to configure (the window is all grey), more, setup sentences after the void main() line where somewhat like:

Code:

setup_adc_ports(NO_ANALOGS|VSS_VDD);
setup_adc(ADC_CLOCK_DIV_2);
setup_spi(SPI_SS_DISABLED);
setup_timer_0(RTCC_INTERNAL|RTCC_DIV_1);
setup_timer_1(T1_DISABLED);
setup_timer_2(T2_DISABLED,0,1);
setup_ccp1(CCP_OFF);
setup_comparator(NC_NC_NC_NC);
setup_oscillator(OSC_8MHZ);

Now they are reduced to

Code:

setup_comparator(NC_NC_NC_NC);// This device COMP currently not supported by the PICWizard
setup_oscillator(OSC_8MHZ);

Last compiler version I used was somewhat around 4.09x or 4.08x.

I've seen that use delay directive has also changed, now there is (int=xxx...) rather than (clock=xxx..).

Some definition files went wrong?
_________________
Listen, why don't you relax? Take a pill, bake a cake or go and read the encyclopedia.

Display posts from previous:

	CCS Forum Index -> General CCS C Discussion	All times are GMT - 6 Hours
Page 1 of 1

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum