CCS :: View topic - anybody can check my program

FAQ

Forum Help

Official CCS Support

Profile Log in to check your private messages Log in

CCS does not monitor this forum on a regular basis.

Please do not post bug reports on this forum. Send them to CCS Technical Support

anybody can check my program

CCS Forum Index -> General CCS C Discussion

View previous topic :: View next topic

Author

Message

sonic05

Joined: 19 Sep 2010
Posts: 5

anybody can check my program

Posted: Sat Oct 02, 2010 8:18 am

please help me...

Code:

#include <16F877A.h>
#fuses XT,NOWDT,PUT,NOBROWNOUT,NOLVP
#use delay(clock = 4000000)

#byte PORTA=0X05
#byte PORTC=0x07
#byte PORTB=0X06

#define A0 PIN_A0
#define A1 PIN_A1
#define A2 PIN_A2
#define A3 PIN_A3
#define A4 PIN_A4
#define A5 PIN_A5

#define E1 PIN_E1

int sec1,sec2,min1,min2,hour1,hour2;
int secs1,secs2,mins1,mins2,hours1,hours2;
int num1=5,num2=5,num3=5;

int counter=125;
int flag=0;

const int table[10]={0b00111111,
0b00000110,
0b01011011,
0b01001111,
0b01100110,
0b01101101,
0b01111101,
0b00000111,
0b01111111,
0b01101111};

void main()
{
PORTB=0X00;
PORTC=0X00;

set_tris_a(0xff);
set_tris_c(0x00);
set_tris_b(0x00);
set_RTCC(6);
setup_counters(RTCC_INTERNAL,RTCC_DIV_32);
enable_interrupts (INT_RTCC);
enable_interrupts (GLOBAL);

for(;;)
{
PORTB=table[sec1];
PORTC=0X01;
delay_ms(15);

PORTB=table[sec2];
PORTC=0x02;
delay_ms(15);

PORTB=table[min1];
PORTC=0x04;
delay_ms(15);

PORTB=table[min2];
PORTC=0x08;
delay_ms(15);

PORTB=table[hour1];
PORTC=0x10;
delay_ms(15);

PORTB=table[hour2];
PORTC=0x20;
delay_ms(15);

if(flag==1){

flag=0;

if(input(A4)==1)
{
disable_interrupts(INT_RTCC);

if(input(A2)==1) { --num1; }
if(num1==0){
if(++min1>9) {
min1=0;
if(++min2>5) { min2=0; }
}
num1=5;
}
if(input(A3)==1){ --num2; }

if(num2==0)

{
if( ++hour1>9 )
{
hour1=0;
++hour2;
}
if( (hour2==1) & (hour1==3) ) {
hour1=1;
hour2=0;
}
num2=5;
}

if(input(A1)==1) { --num3; }
if(num3==0){
if(++sec1>9) {
sec1=0;
if(++sec2>5) { sec2=0; }
}
num3=5;
}
}

else if(input(A4)==0){
enable_interrupts(INT_RTCC);
}

/////////////////////////////////////////////////////////// im not sure in this part
if(input(E1)==1)
{
disable_interrupts(INT_RTCC);

if(input(A2)==1) { --num1; }
if(num1==0){
if(++mins1>9) {
mins1=0;
if(++mins2>5) { mins2=0; }
}
num1=5;
}
if(input(A3)==1){ --num2; }

if(num2==0)

{
if( ++hours1>9 )
{
hours1=0;
++hours2;
}
if( (hours2==2) & (hours1==4) ) {
hours1=1;
hours2=0;
}
num2=5;
}

if(input(A1)==1) { --num3; }
if(num3==0){
if(++secs1>9) {
secs1=0;
if(++secs2>5) { secs2=0; }
}
num3=5;
}
}

else if(input(E1)==0){
enable_interrupts(INT_RTCC);
}
}

}
}
//////////////////////////////////////////////////

#int_RTCC
microII()
{ //void switch_time();
if(input(A5)==0)

{
if(--counter>0)return;
counter=125;
flag=1;

if(++sec1>9){
sec1=0;

if(++sec2>5){
sec2=0;

if(++min1>9){
min1=0;

if(++min2>5){
min2=0;
if( ++hour1>9 )
{
hour1=0;
++hour2;
}
if( (hour2==1) & (hour1==3) ) {
sec1=0;
sec2=0;
min1=0;
min2=0;
hour1=1;
hour2=0;

}

///////////////////////////////////////////////////////////and also here...
else if
(input(A5)==1)

{

if(--counter>0)return;
counter=125;
flag=1;

if(++secs1>9){
sec1=0;

if(++secs2>5){
sec2=0;

if(++mins1>9){
min1=0;

if(++mins2>5){
min2=0;
if( ++hours1>9 )
{
hours1=0;
++hours2;
}
if( (hours2==2) & (hours1==4) ) {
secs1=0;
secs2=0;
mins1=0;
mins2=0;
hours1=0;

////////////////////////////////////////////////////////
}
}
}
}
}
}
}
}
}
}
}
}

In that program...if I press PIN_A5 the program of 24 hours will run. But if not, the program of 12 hours will run. But it still not working. But when I remove all the part that I'm not sure of, the program of 12 hours clock will run.

And can you please help me also to make a program for stopwatch and assign a designated switch ?

Display posts from previous:

	CCS Forum Index -> General CCS C Discussion	All times are GMT - 6 Hours
Page 1 of 1

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum