View previous topic :: View next topic |
Author |
Message |
Bilal
Joined: 24 Apr 2010 Posts: 75 Location: Islamabad
|
Stepper motor |
Posted: Sun Sep 12, 2010 12:50 am |
|
|
Hi i want to control a Stepper motor with 4 pin s and 42 steps with PIC16F877A and ULN2003 Plz help me..
do some one have its program.. i have no idea how to move step by step _________________ ... |
|
![](templates/subSilver/images/spacer.gif) |
ECACE
Joined: 24 Jul 2006 Posts: 94
|
|
![](templates/subSilver/images/spacer.gif) |
Ttelmah
Joined: 11 Mar 2010 Posts: 19369
|
|
Posted: Tue Sep 14, 2010 2:24 am |
|
|
Not really, the rules apply to the _code_ forum, not here...
This is one of the forums, where 'asking for help' is expected, but _help_, not 'write it for me'...
Starting by using the forum search might be a better beginning.
There are many threads about controlling a stepper.
Have a look at:
http://www.ccsinfo.com/forum/viewtopic.php?t=32864&highlight=stepper+motor
Which is about a very similar requirement, stepping a number of steps, on a four pole motor.
You will only be able to drive a motor quite slowly with a simple drive like this.
Best Wishes |
|
![](templates/subSilver/images/spacer.gif) |
ECACE
Joined: 24 Jul 2006 Posts: 94
|
|
Posted: Tue Sep 14, 2010 5:54 am |
|
|
Quote: | Not really, the rules apply to the _code_ forum, not here...
This is one of the forums, where 'asking for help' is expected, but _help_, not 'write it for me'... |
It was in the code forum and got moved to the general forum.
But as you stated, there are quite a few posts on controlling motors using the search function. _________________ A HW Engineer 'trying' to do SW !!! Run!!! |
|
![](templates/subSilver/images/spacer.gif) |
|