CCS C Software and Maintenance Offers
FAQFAQ   FAQForum Help   FAQOfficial CCS Support   SearchSearch  RegisterRegister 

ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

CCS does not monitor this forum on a regular basis.

Please do not post bug reports on this forum. Send them to support@ccsinfo.com
Stepper motor

 
Post new topic   Reply to topic    CCS Forum Index -> General CCS C Discussion
View previous topic :: View next topic  
Author Message
Bilal



Joined: 24 Apr 2010
Posts: 75
Location: Islamabad

View user's profile Send private message Send e-mail

Stepper motor
PostPosted: Sun Sep 12, 2010 12:50 am     Reply with quote
Hi i want to control a Stepper motor with 4 pin s and 42 steps with PIC16F877A and ULN2003 Plz help me..
do some one have its program.. i have no idea how to move step by step
_________________
...
ECACE



Joined: 24 Jul 2006
Posts: 94

View user's profile Send private message

PostPosted: Mon Sep 13, 2010 11:29 am     Reply with quote
Link below might help:

http://www.ccsinfo.com/forum/viewtopic.php?t=27260

#2
_________________
A HW Engineer 'trying' to do SW !!! Run!!!
Ttelmah



Joined: 11 Mar 2010
Posts: 19335

View user's profile Send private message

PostPosted: Tue Sep 14, 2010 2:24 am     Reply with quote
Not really, the rules apply to the _code_ forum, not here...
This is one of the forums, where 'asking for help' is expected, but _help_, not 'write it for me'...

Starting by using the forum search might be a better beginning.
There are many threads about controlling a stepper.

Have a look at:
http://www.ccsinfo.com/forum/viewtopic.php?t=32864&highlight=stepper+motor

Which is about a very similar requirement, stepping a number of steps, on a four pole motor.

You will only be able to drive a motor quite slowly with a simple drive like this.

Best Wishes
ECACE



Joined: 24 Jul 2006
Posts: 94

View user's profile Send private message

PostPosted: Tue Sep 14, 2010 5:54 am     Reply with quote
Quote:
Not really, the rules apply to the _code_ forum, not here...
This is one of the forums, where 'asking for help' is expected, but _help_, not 'write it for me'...


It was in the code forum and got moved to the general forum.
But as you stated, there are quite a few posts on controlling motors using the search function.
_________________
A HW Engineer 'trying' to do SW !!! Run!!!
Display posts from previous:   
Post new topic   Reply to topic    CCS Forum Index -> General CCS C Discussion All times are GMT - 6 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


Powered by phpBB © 2001, 2005 phpBB Group