CCS C Software and Maintenance Offers
FAQFAQ   FAQForum Help   FAQOfficial CCS Support   SearchSearch  RegisterRegister 

ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

CCS does not monitor this forum on a regular basis.

Please do not post bug reports on this forum. Send them to support@ccsinfo.com
7 bits data

 
Post new topic   Reply to topic    CCS Forum Index -> General CCS C Discussion
View previous topic :: View next topic  
Author Message
Jpts
Guest
7 bits data
PostPosted: Fri Sep 04, 2009 8:02 am     Reply with quote
I am developing a hardware PIC to read and treat string data from a electronic balance. The string send from balance is the weight. After some test, I noted that functions like, gets(), if (data_wheight == any), etc.. does not work ! I did some project before using these command and work fine, but in this particular project, it’s not working. Reading the balance manual, its inform me that transmit data in 7bit instead 8 bits. Funny is when a printf back the data read from the balance to a HyperTerminal, its print OK !

Do I have to included any command line to make functions above to work properly reading 7 bits data ?

Tks, Jp
PCM programmer



Joined: 06 Sep 2003
Posts: 21708

View user's profile Send private message

PostPosted: Fri Sep 04, 2009 12:24 pm     Reply with quote
See this recent thread:
http://www.ccsinfo.com/forum/viewtopic.php?t=40069
Display posts from previous:   
Post new topic   Reply to topic    CCS Forum Index -> General CCS C Discussion All times are GMT - 6 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


Powered by phpBB © 2001, 2005 phpBB Group