CCS C Software and Maintenance Offers
FAQFAQ   FAQForum Help   FAQOfficial CCS Support   SearchSearch  RegisterRegister 

ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

CCS does not monitor this forum on a regular basis.

Please do not post bug reports on this forum. Send them to CCS Technical Support
Where n how to start with piccoWatt PIC18LF25j50

 
Post new topic   Reply to topic    CCS Forum Index -> General CCS C Discussion
View previous topic :: View next topic  
Author Message
electrogen



Joined: 24 Feb 2009
Posts: 15
Location: Addis

View user's profile Send private message

Where n how to start with piccoWatt PIC18LF25j50
PostPosted: Sun Aug 30, 2009 3:04 am     Reply with quote
Hello guys,

I've been doing a lot with 16f, and 18F...and now I want to port my application code(an mp3 player with codec IC and 1GB NAND flash) to Microchip's new series of "piccoWatt XLP" USB devices. I got PIC25LF25J50, all I want to do is add USB connectivity to my player (as mass storage device) and take advantage of the low power consumption.

This PIC is not listed in my CCS version (v4.5..), would you suggest me the best compiler for these PICs?

I would appreciate if anybody could help me get a reference design(SW & HW). I just want a quick jump

Thanks all
_________________
chips are forever
Display posts from previous:   
Post new topic   Reply to topic    CCS Forum Index -> General CCS C Discussion All times are GMT - 6 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


Powered by phpBB © 2001, 2005 phpBB Group