CCS C Software and Maintenance Offers
FAQFAQ   FAQForum Help   FAQOfficial CCS Support   SearchSearch  RegisterRegister 

ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

CCS does not monitor this forum on a regular basis.

Please do not post bug reports on this forum. Send them to CCS Technical Support
PIC18 with JDM programmer?

 
Post new topic   Reply to topic    CCS Forum Index -> General CCS C Discussion
View previous topic :: View next topic  
Author Message
electrogen



Joined: 24 Feb 2009
Posts: 15
Location: Addis

View user's profile Send private message

PIC18 with JDM programmer?
PostPosted: Thu Mar 12, 2009 8:34 am     Reply with quote
hello guys,

I had the JDM programmer hardware which I have been using with winPIC
(by Wolfgang Buescher). It works fine with PIC16's but I couldn't program PIC18F458 with it. Did any body succeded programing the PIC18,s with the JDM programmer.

I already have soldered my PIC on the PCB extending all the necessary pins
for ICSP

I've no other programmers and I got stuck, please help
_________________
chips are forever
Display posts from previous:   
Post new topic   Reply to topic    CCS Forum Index -> General CCS C Discussion All times are GMT - 6 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


Powered by phpBB © 2001, 2005 phpBB Group