CCS C Software and Maintenance Offers
FAQFAQ   FAQForum Help   FAQOfficial CCS Support   SearchSearch  RegisterRegister 

ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

CCS does not monitor this forum on a regular basis.

Please do not post bug reports on this forum. Send them to CCS Technical Support
Change parity and databit possible?

 
Post new topic   Reply to topic    CCS Forum Index -> General CCS C Discussion
View previous topic :: View next topic  
Author Message
sraiderk



Joined: 09 Feb 2005
Posts: 48

View user's profile Send private message

Change parity and databit possible?
PostPosted: Tue Feb 17, 2009 10:32 am     Reply with quote
Is is possible change the parity and databit count value at pic start up when I am using the Hw rs232 and its interrupt. (in 18f series via version 3.49)
sraiderk



Joined: 09 Feb 2005
Posts: 48

View user's profile Send private message

PostPosted: Tue Feb 17, 2009 10:34 am     Reply with quote
I mean
#use rs232(baud=115200,parity=N,xmit=PIN_C6,rcv=PIN_C7,bits=8)
or
#use rs232(baud=115200,parity=e,xmit=PIN_C6,rcv=PIN_C7,bits=7)
or
#use rs232(baud=115200,parity=o,xmit=PIN_C6,rcv=PIN_C7,bits=8)

Is there any method to select them ?
PCM programmer



Joined: 06 Sep 2003
Posts: 21708

View user's profile Send private message

PostPosted: Tue Feb 17, 2009 11:22 pm     Reply with quote
Here are some previous threads on this topic:
http://www.ccsinfo.com/forum/viewtopic.php?t=36699
http://www.ccsinfo.com/forum/viewtopic.php?t=34182
http://www.ccsinfo.com/forum/viewtopic.php?t=26561
http://www.ccsinfo.com/forum/viewtopic.php?t=17607
Display posts from previous:   
Post new topic   Reply to topic    CCS Forum Index -> General CCS C Discussion All times are GMT - 6 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


Powered by phpBB © 2001, 2005 phpBB Group