EEPROM initial values

rhaguiuda · Joined: 05 Sep 2007 Posts: 46 Location: Londrina - Brazil

Hi

How can I write a PIC EEPROM, in the device programming?

Thanks
_________________
Give a man a fish and you'll feed him for a day. Teach a man to fish, and you'll feed him for a lifetime.

Ttelmah · Guest

Depends on the PIC.
Generally, for _16_ devices:

#ROM 0x2100 = {data here}

For _18_ devices:

#ROM 0xF00000 = {data here}

A search here should have found this. The actual addresses are in the _programming specification_ for the PIC involved.

Best Wishes

rhaguiuda · Joined: 05 Sep 2007 Posts: 46 Location: Londrina - Brazil

Ttelmath

And how I figure out the first EEPROM adress of my PIC?
I search the datasheet but couldn't find...

Thanks.
_________________
Give a man a fish and you'll feed him for a day. Teach a man to fish, and you'll feed him for a lifetime.

PCM programmer · Joined: 06 Sep 2003 Posts: 21708

See my post at the end of this thread. It tells exactly how to find the
eeprom address, and how to find the document that tells it.
http://www.ccsinfo.com/forum/viewtopic.php?t=35539&highlight=programming+specification