CCS C Software and Maintenance Offers
FAQFAQ   FAQForum Help   FAQOfficial CCS Support   SearchSearch  RegisterRegister 

ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

CCS does not monitor this forum on a regular basis.

Please do not post bug reports on this forum. Send them to support@ccsinfo.com
USB not recognized

 
Post new topic   Reply to topic    CCS Forum Index -> General CCS C Discussion
View previous topic :: View next topic  
Author Message
carrie_



Joined: 17 May 2008
Posts: 6

View user's profile Send private message MSN Messenger

USB not recognized
PostPosted: Thu Jun 26, 2008 3:38 am     Reply with quote
Hello all,

I get the USB not recognized, device might malfunction error when i first plug in my USB board to the PC. After a little scanning, it says that it has found the software needed for the USB board. But the annoying USB not recognized by windows error keep popping up. I unplug the USB, and plug it in again, no error, nothing. not even "USB detected" what is happening?? :(

When i have the USB board plugged in, i've tested the ground and 5V, and theres a 5V voltage going across. Does this mean it's working? and when i unplug it, the 5V is obviously not there anymore.

How can i troubleshoot this? Please help! and i'm sorry if my questions doesnt make much sense, i'm still very new to this and im learning as i stumble! Smile

thanks so much guys!
Display posts from previous:   
Post new topic   Reply to topic    CCS Forum Index -> General CCS C Discussion All times are GMT - 6 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


Powered by phpBB © 2001, 2005 phpBB Group