CCS C Software and Maintenance Offers
FAQFAQ   FAQForum Help   FAQOfficial CCS Support   SearchSearch  RegisterRegister 

ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

CCS does not monitor this forum on a regular basis.

Please do not post bug reports on this forum. Send them to CCS Technical Support
DS1302 PROBLEM

 
Post new topic   Reply to topic    CCS Forum Index -> General CCS C Discussion
View previous topic :: View next topic  
Author Message
electro22



Joined: 20 Apr 2008
Posts: 6

View user's profile Send private message

DS1302 PROBLEM
PostPosted: Sun May 18, 2008 12:48 pm     Reply with quote
Hi everyone,

I use DS1302, 16F877A. I set it in HEX and get time in HEX too. And it works well.
But I get time from user as a decimal via keypad. Then I have to add this time to current time which I get from DS1302 at first. After I did this I see the new calculated time on LCD. The new time had many problems the most important one is B C D E etc hex numbers are shown. I think I have to change decimal time in to HEX or some thing else. But I dont know How I can do?
IF someone could help, I would be satisfied.
Thanks in advance.
PCM programmer



Joined: 06 Sep 2003
Posts: 21708

View user's profile Send private message

PostPosted: Sun May 18, 2008 1:24 pm     Reply with quote
This thread has functions to convert from BCD to binary, and also
from binary to BCD:
http://www.ccsinfo.com/forum/viewtopic.php?p=46052
Display posts from previous:   
Post new topic   Reply to topic    CCS Forum Index -> General CCS C Discussion All times are GMT - 6 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


Powered by phpBB © 2001, 2005 phpBB Group