View previous topic :: View next topic |
Author |
Message |
arunb
Joined: 08 Sep 2003 Posts: 492 Location: India
|
How to read a MMC using a computer (not file access) ?? |
Posted: Mon May 19, 2008 7:57 am |
|
|
Hi,
I am working on a project that uses a MMC. Is there a windows based program that can read the MMC and show the data contained in any address.
The data is not stored in any of the standard filing systems such as FAT, NTFS etc.
thanks
arunb |
|
|
Douglas Kennedy
Joined: 07 Sep 2003 Posts: 755 Location: Florida
|
|
Posted: Mon May 19, 2008 8:56 am |
|
|
Look at Winhex |
|
|
asmallri
Joined: 12 Aug 2004 Posts: 1634 Location: Perth, Australia
|
Re: How to read a MMC using a computer (not file access) ?? |
Posted: Mon May 19, 2008 9:00 am |
|
|
arunb wrote: | Hi,
I am working on a project that uses a MMC. Is there a windows based program that can read the MMC and show the data contained in any address.
The data is not stored in any of the standard filing systems such as FAT, NTFS etc.
thanks
arunb |
You need a disk hex file editor such as WINHEX or DISKEDIT
Note than some disk editors expect the SD/MMC (actually any supported media) to contain a valid boot sector and/or partition table _________________ Regards, Andrew
http://www.brushelectronics.com/software
Home of Ethernet, SD card and Encrypted Serial Bootloaders for PICs!! |
|
|
|