CCS C Software and Maintenance Offers
FAQFAQ   FAQForum Help   FAQOfficial CCS Support   SearchSearch  RegisterRegister 

ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

CCS does not monitor this forum on a regular basis.

Please do not post bug reports on this forum. Send them to CCS Technical Support
UDP for transmit only - IP target address known- HOW to DO!!

 
Post new topic   Reply to topic    CCS Forum Index -> General CCS C Discussion
View previous topic :: View next topic  
Author Message
Paul Boland



Joined: 13 May 2008
Posts: 4

View user's profile Send private message

UDP for transmit only - IP target address known- HOW to DO!!
PostPosted: Tue May 13, 2008 5:46 am     Reply with quote
I have the latest Ethernet board, arrived last week and works fine. Have the Ex12 working fine but it needs to Rx a packet to get remote address. I already know the remote IP address, how/where can I add this in to avoid the RX requirement. Have looked in many places on forum and seen some code but the latest Tx and Rx functions in the samples on CD look different, I am worried that this is due to an updated IP code base
All help greatly received!!!!
Thanks
Paul
_________________
Trouble once again!
Display posts from previous:   
Post new topic   Reply to topic    CCS Forum Index -> General CCS C Discussion All times are GMT - 6 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


Powered by phpBB © 2001, 2005 phpBB Group