CCS C Software and Maintenance Offers
FAQFAQ   FAQForum Help   FAQOfficial CCS Support   SearchSearch  RegisterRegister 

ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

CCS does not monitor this forum on a regular basis.

Please do not post bug reports on this forum. Send them to CCS Technical Support
Sync_master/Slave

 
Post new topic   Reply to topic    CCS Forum Index -> General CCS C Discussion
View previous topic :: View next topic  
Author Message
jjude
Guest
Sync_master/Slave
PostPosted: Wed Sep 26, 2007 12:23 am     Reply with quote
Run this code 16F87x?
Can i connect series 10 "slave machines" (master only send data, slaves only receive data)?
inservi



Joined: 13 May 2007
Posts: 128

View user's profile Send private message

PostPosted: Wed Sep 26, 2007 1:23 am     Reply with quote
Do you mean serie or parallel ?
if the slaves are only receiving then you need a parallel bus.

i already make that in parallel with 1 master and 8 slave in a 'home made bus' like i2c. The distances was about 1.5 meter (5 foot) and about 200Khz.

i'm sure that must work with 10 slaves. If the fanout is not good you can use a small mosfet for buffering.



dro
_________________
in médio virtus
jjude
Guest
Example
PostPosted: Wed Sep 26, 2007 1:46 am     Reply with quote
inservi wrote:
Do you mean serie or parallel ?

I think CCS Complier examples Ex_Sync_Master.c and Ex_Sync_Slave.c.
Display posts from previous:   
Post new topic   Reply to topic    CCS Forum Index -> General CCS C Discussion All times are GMT - 6 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


Powered by phpBB © 2001, 2005 phpBB Group