Help With DLR3P Circuit & Hex File (Off Topic)

[BOB_SANTANA]

Hi All

Just trying to see if anyone in this forum might be able to solve my night mare.
A couple of weeks ago i decided to built a system that would allow me to send receive sms mgs .
so having looked at all the alternatives i decided to use a Nokia 6210 as this supports Text Mode.
Went on ebay and ordered the phone and an original DLR3P cable from nokia.
i was able to communicate with the phone via hyperthem but realised that the cable had some embedded electronics and couldn't get it to work with
my project board.
i search on the net and found a page
www.atrox.at/datacable/dlr3/index.html
where you can make the cable yourself so i ordered the parts which have arrived since last week and just when i wanted to start the project i discovered that the link to the page is no longer working so i dont have the schmatics or the hex files for the pic.
So if anyone has built this cable in the past i would very much appreciate it if you can share it with me

Regards
Bob
_________________
BOB_Santana

[ckielstra]

For recovering old websites try the Internet Archive Wayback Machine.

For example here I found the following link: http://web.archive.org/web/20070410094905/http://www.atrox.at/datacable/dlr3/index.html

[BOB_SANTANA]

ckielstra

Thank you very much for your help.
BTW i never knew you could do that its great i now have both schematics for the first and second version all i need now is to find someone that has built either to send me the hex files as they were not archived
So Anyoneout there i need your help

Regards
_________________
BOB_Santana

[ckielstra]

From the first posted link I can get to the hex file of the second version without any problems.

[BOB_SANTANA]

Wow

Thanks its the 8mhz one and its the only one i didnt try.
You have made my day

TopMan
_________________
BOB_Santana