CCS C Software and Maintenance Offers
FAQFAQ   FAQForum Help   FAQOfficial CCS Support   SearchSearch  RegisterRegister 

ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

CCS does not monitor this forum on a regular basis.

Please do not post bug reports on this forum. Send them to support@ccsinfo.com
16F886.H FILE

 
Post new topic   Reply to topic    CCS Forum Index -> General CCS C Discussion
View previous topic :: View next topic  
Author Message
ALCION



Joined: 31 May 2007
Posts: 16

View user's profile Send private message

16F886.H FILE
PostPosted: Mon Jul 16, 2007 2:57 pm     Reply with quote
Hi, I have the ver. 3.222 PCH but I need program the pic16f886. where can I download the new ver. because 3.222 not support that pic


tnks
PCM programmer



Joined: 06 Sep 2003
Posts: 21708

View user's profile Send private message

PostPosted: Mon Jul 16, 2007 3:09 pm     Reply with quote
Quote:
I have the ver. 3.222 PCH

PCH doesn't support the 16F-series. You need the PCM compiler.

Also, just getting the .H file doesn't add support for the new PIC.
The main support for the new PIC is in the Devices.dat file and
the PCM.DLL file.

If you have the full IDE (PCWH), you can use the Device Editor
to create an entry for the new PIC. See this post for instructions.
http://www.ccsinfo.com/forum/viewtopic.php?t=29362
But even then, you may not have full support for the peripheral
modules in the PIC, if they are sufficiently different than the PIC
that you used as a "base" to make the new Devices.dat entry.
Display posts from previous:   
Post new topic   Reply to topic    CCS Forum Index -> General CCS C Discussion All times are GMT - 6 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


Powered by phpBB © 2001, 2005 phpBB Group