CCS C Software and Maintenance Offers
FAQFAQ   FAQForum Help   FAQOfficial CCS Support   SearchSearch  RegisterRegister 

ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

CCS does not monitor this forum on a regular basis.

Please do not post bug reports on this forum. Send them to support@ccsinfo.com
Programming the 10F200....??

 
Post new topic   Reply to topic    CCS Forum Index -> General CCS C Discussion
View previous topic :: View next topic  
Author Message
Guest
Programming the 10F200....??
PostPosted: Mon May 07, 2007 1:13 pm     Reply with quote
I've been using the PCM compiler (14 bit) for some time now, but just recently had a need to program a 10F200 device. Did I read somewhere that a FREE version of the CCS compiler for 12 bit parts is bundled with MPLAB? I can't seem to find that info again :-(!

Jeff
PCM programmer



Joined: 06 Sep 2003
Posts: 21708

View user's profile Send private message

PostPosted: Mon May 07, 2007 1:23 pm     Reply with quote
It's included in MPLAB. During the installation of MPLAB, select "Custom"
installation. Then you'll see a tree of modules that can be installed.
Look under "Third Party Applications" and select the tickbox for
"CCS PCB compiler".

I haven't done this lately. You may also have to download the "plug-in"
from the CCS download page and run it.
Display posts from previous:   
Post new topic   Reply to topic    CCS Forum Index -> General CCS C Discussion All times are GMT - 6 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


Powered by phpBB © 2001, 2005 phpBB Group