CCS C Software and Maintenance Offers
FAQFAQ   FAQForum Help   FAQOfficial CCS Support   SearchSearch  RegisterRegister 

ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

CCS does not monitor this forum on a regular basis.

Please do not post bug reports on this forum. Send them to CCS Technical Support
eeprom problem

 
Post new topic   Reply to topic    CCS Forum Index -> General CCS C Discussion
View previous topic :: View next topic  
Author Message
deneme
Guest
eeprom problem
PostPosted: Sun Apr 29, 2007 8:37 am     Reply with quote
I have device that controls 3 motors and I control the temperature I write the eeprom user tuned parameters with 4 button keypad 2of them are for selecting menu 2 of them changing parameter as + and - .when the parameters was changed by user I write it to eeprom and I read it when I must write to lcd or I must use for motor control. But sometimes it will be 0 or 255 when I read eeprom. Can it be because of compiler or not
deneme
Guest
eeprom problem
PostPosted: Sun Apr 29, 2007 8:39 am     Reply with quote
I forget to say that I use 16F877A
Display posts from previous:   
Post new topic   Reply to topic    CCS Forum Index -> General CCS C Discussion All times are GMT - 6 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


Powered by phpBB © 2001, 2005 phpBB Group