CCS C Software and Maintenance Offers
FAQFAQ   FAQForum Help   FAQOfficial CCS Support   SearchSearch  RegisterRegister 

ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

CCS does not monitor this forum on a regular basis.

Please do not post bug reports on this forum. Send them to CCS Technical Support
Help with RS232 with flow control

 
Post new topic   Reply to topic    CCS Forum Index -> General CCS C Discussion
View previous topic :: View next topic  
Author Message
rmderbes



Joined: 25 Apr 2007
Posts: 5

View user's profile Send private message

Help with RS232 with flow control
PostPosted: Thu Apr 26, 2007 7:09 am     Reply with quote
Please, I need a little help to code a serial interface with flow control (RTS/CTS). At this moment, I'm using a board with three serial interfaces (1 hardware UART plus 2 software ones with level converters, a MAX232), but I'm starting a project with a GPRS modem module with a serial interface which needs flow control. I still have two or three spare IO pins ...
I'm currently using 16F877 and CCS v4.X.
Thank you
PCM programmer



Joined: 06 Sep 2003
Posts: 21708

View user's profile Send private message

PostPosted: Thu Apr 26, 2007 11:40 am     Reply with quote
Use the board's search page:
http://www.ccsinfo.com/forum/search.php

Set it to search for: RTS CTS
Also set for "Search for all term".

Example of results:
http://www.ccsinfo.com/forum/viewtopic.php?t=24612&highlight=rts+cts
Display posts from previous:   
Post new topic   Reply to topic    CCS Forum Index -> General CCS C Discussion All times are GMT - 6 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


Powered by phpBB © 2001, 2005 phpBB Group