destination MAC address on CCS Ethernet Evalutaion Board

[eric]

I'm using the CCS ENC28J proto board. Not sure how the dest mac address is set.

Ethereal indicates that it is currently 39:01:01:04:02:7b?
src 01:02:03:04:05:06 -> dst 39:01:01:04:02:7b

I would like to set dest address to ff:ff:ff:ff:ff:ff
- or a known dest mac address on my network.

Gone through most of the code and cannot quite figure out how to hardwire the destination mac address when UDPTx'ing.

you would think I could follow how ARP.c assign it (although I am not currently using ARP) but, no I do not quite get it.

Cheers,
Eric

[eric]

OK, problem resolved itself soon after posting

I can hardwire it in
In MacPutheader(

header.dest.v[0]=0xff;
header.dest.v[1]=0xff;
header.dest.v[2]=0xff;
header.dest.v[3]=0xff;
header.dest.v[4]=0xff;
header.dest.v[5]=0xff;

header.source.v[0]=MY_MAC_BYTE1;
header.source.v[1]=MY_MAC_BYTE2;
header.source.v[2]=MY_MAC_BYTE3;
header.source.v[3]=MY_MAC_BYTE4;
header.source.v[4]=MY_MAC_BYTE5;
header.source.v[5]=MY_MAC_BYTE6;