CCS C Software and Maintenance Offers
FAQFAQ   FAQForum Help   FAQOfficial CCS Support   SearchSearch  RegisterRegister 

ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

CCS does not monitor this forum on a regular basis.

Please do not post bug reports on this forum. Send them to CCS Technical Support
Web enabling a PIC....

 
Post new topic   Reply to topic    CCS Forum Index -> General CCS C Discussion
View previous topic :: View next topic  
Author Message
Guest
Web enabling a PIC....
PostPosted: Tue Jan 02, 2007 11:06 am     Reply with quote
Hi All,

I've been programming PIC's for a couple of years using CCS C, and now I'd like to try my hand at "web-enabling" one of my projects. To start, I have a PIC based weather station that I would like to put on the web. The weather station outputs it's data via RS-232, and that is how I'd connect it to the web server. The web server would then serve pages with dynamic content (weather data). I was thinking that as a entry into this world I'd start with the PIC-Web board from Sparkfun. I know about the SitePlayer, and the XPort, but I've read that these devices have some rather severe programming limitations. Any comments about how to best go about this project??

Thanks,

Tony
Display posts from previous:   
Post new topic   Reply to topic    CCS Forum Index -> General CCS C Discussion All times are GMT - 6 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


Powered by phpBB © 2001, 2005 phpBB Group