CCS :: View topic - Error in 24512.c driver

FAQ

Forum Help

Official CCS Support

Profile Log in to check your private messages Log in

CCS does not monitor this forum on a regular basis.

Please do not post bug reports on this forum. Send them to CCS Technical Support

Error in 24512.c driver

CCS Forum Index -> General CCS C Discussion

View previous topic :: View next topic

Author

Message

Neckruin

Joined: 17 Jan 2006
Posts: 66

Error in 24512.c driver

Posted: Tue Dec 12, 2006 7:19 am

Hi all,
I've been trying to use the 24512.c driver with a 24LC512 serial EEPROM from MicroChip and I have detected a problem.
When doing more than one single byte write into the memory, only the first byte was correctly written. I have modified the code of the write_ext_eeprom() function and now it works.
This is the new code for that function:

Code:

void write_ext_eeprom(int16 address, int8 data) {
int1 status;
int8 add1;
int8 add2;

add1 = make8(address, 1);
add2 = make8(address, 0);
i2c_start();
i2c_write(EEPROM_WRITE);
i2c_write(add1);
i2c_write(add2);
i2c_write(data);
i2c_stop();
i2c_start();
status=i2c_write(EEPROM_WRITE);
while(status==1)
{
i2c_start();
status=i2c_write(EEPROM_WRITE);
}
i2c_stop(); // I added this line
}

See you all,

Juanma

Display posts from previous:

	CCS Forum Index -> General CCS C Discussion	All times are GMT - 6 Hours
Page 1 of 1

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum