CCS C Software and Maintenance Offers
FAQFAQ   FAQForum Help   FAQOfficial CCS Support   SearchSearch  RegisterRegister 

ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

CCS does not monitor this forum on a regular basis.

Please do not post bug reports on this forum. Send them to support@ccsinfo.com
Problem Reading AT45DB321C DataFalsh

 
Post new topic   Reply to topic    CCS Forum Index -> General CCS C Discussion
View previous topic :: View next topic  
Author Message
gbolson



Joined: 24 Oct 2006
Posts: 7

View user's profile Send private message

Problem Reading AT45DB321C DataFalsh
PostPosted: Sun Nov 26, 2006 7:34 pm     Reply with quote
I'm having a problem reading a Atmel AT45DB321C using the Continuous Array Read (0x68 since I'm NOT using the RapidS mode) command.
My problem is that the 1st 2 bytes returned after I send the command followed by the 3 bytes containing the page and byte number to start on and finally the 4 don't care bytes, are messed up.
For the 1st byte read back, it seems to return the 8 least significant bits of the byte address it should start reading from (that I just sent it), and the 2nd byte is always 0x00. Starting with the 3rd byte, everyting is fine.
Has anyone ever run into this???
Greg
Display posts from previous:   
Post new topic   Reply to topic    CCS Forum Index -> General CCS C Discussion All times are GMT - 6 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


Powered by phpBB © 2001, 2005 phpBB Group